ATEX Sounders – Hazardous Area ATEX Sounders/Horns ATEX IECEX Zone 1 & Zone 2

ATEX Sounders Hazardous Area ATEX Sounders ATEX IECEX Zone 1 & Zone 2

ATEX Sounders – Hazardous Area ATEX Sounders ATEX IECEX Zone 1 & Zone 2

ATEX Sounders

ATEX Certified For Zone 1 & Zone 2 Hazardous Areas – Explosion Proof

The MEDC and FHF range of ATEX sounders are suitable for a wide variety of hazardous area signalling applications and feature a selection of tone settings and traditional bells.

Hazardous area sounders are used to warn of potentially dangerous situations or to relay instructions in ATEX and IECEx Zone 1 and Zone 2 hazardous areas.

In addition, the alarms may operate as stand-alone units or be incorporated into a hazard warning system. A wide variety of sound output levels and other options are also available. The ATEX sounders output in dB is measured to European standards at 1 metre.

High-specification explosion protected audible and visual signalling devices (beacons and sounders/horns) are used for fire and gas detection in industrial onshore, marine and offshore hazardous locations – with integral flameproof Ex d enclosure (ATEX & IECEx approved). Intrinsically safe, explosion proof and flameproof alarm horn sounders, loudspeakers, beacons, strobes and call points are available.

ATEX, IECEx, UL, cULs, FM, Ex EAC, ANZEx and INMETRO certified signalling equipment.

Zone 1 & Zone 2 Sounders

The Eaton MEDC hazardous area sounders are offered with global ATEX and IECEx approvals.

  • MEDC DB1 – ex d, weatherproof – up to 113 dB(A)
  • MEDC DB3B – ex d(e) weatherproof – up to 122db
  • MEDC deV 20 – ex de sounder – up to 115 dB(A)
  • MEDC DB5 – up to 103 dB(A) – intrinsically safe (ex ia), weatherproof
  • MEDC DB7 – up to 110 dB(A) – intrinsically safe (ex ia), weatherproof
  • MEDC DB6 – alarm bell – up to 109 dB(A) ex d, weatherproof
  • MEDC dGW 21 – ex de signalling bell – up to 105dB(A)
Hazardous Area Zone 1 Zone 2 ATEX Sounders

Hazardous Area Equipment & Explosion Protection Distributors | ATEX Sounders

ATEX

ATEX

ATEX Certified & Approved

What Is the ATEX Directive?

ATEX is the harmonised EU legislation for controlling explosive atmospheres – the Directive describes the electrical and mechanical equipment allowed in a potentially explosive atmosphere according to the potential risk of explosion determined by the frequency of the occurrence and duration of an explosive atmosphere.

Explosive atmospheres in the workplace can be caused by flammable atmospheric gases, mists, vapours or by combustible dusts that can ignite under certain operating conditions. Equipment and protective systems intended for use in potentially explosive atmospheres cover a range of products, including ATEX phones, ATEX status lights and ATEX call points used on fixed offshore platforms, petrochemical plants, mines, and flour mills with Zone 1 & 2 or Zone 21 & 22 locations.

Should you require technical support to select the most efficient ATEX call point in Zone 1 & 2 or Zone 21 & 22 hazardous areas please do not hesitate to contact us.

EXPLOSION PROTECTION & EXPLOSION PROOF HAZARDOUS AREA EQUIPMENT

Thorne & Derrick International, based in the UK, are stockists and suppliers of an extensive range of Hazardous Area Electrical Equipment – this includes explosion proof (Ex e) and flameproof (Ex d) products certified by ATEX for use in hazardous areas and explosive atmospheres:

  • ATEX Status Lights
  • Portable Lighting
  • Plugs Sockets
  • Control Stations & Push Buttons
  • Junction Boxes
  • Motor Starters
  • Isolators
  • Control Panels
  • Connectors

Abtech Pepperl Fuchs Control Panels Distribution Boards - Hazardous Area Zone 1 Zone 2 ATEX

Key Suppliers: Abtech & Pepperl & Fuchs | Control Panels

ATEX IECEX Approvals

ATEX IECEX Approvals | International Hazardous Area Classifications & Approvals

EATON MEDC

Eaton MEDC have developed ATEX products, including ATEX Beacons, designed for harsh and hazardous area conditions and where there is a risk of explosion due to the presence of flammable gas and dust atmospheres both onshore and offshore – since 1975 MEDC have been designers and manufacturers of alarm, signal, control and communications equipment. T&D distribute the extensive range of Eaton MEDC products – this includes ATEX Certified manual call points, visual, audible alarms, loudspeakers and telephones for hazardous area workplaces, including Zone 1 & Zone 2 explosive atmospheres.

Eaton MEDC Beacons & Sounders

Thorne & Derrick, are the Explosive Atmosphere Experts, distributing an extensive range of ATEX Certified Equipment including heat tracing cables and systemselectrical heating productselectrical enclosures and plug/sockets outlets.

Complete range of LV-HV Cable Joints, Terminations, Cleats & Glands are available to support installation of power, control and instrumentation cables up to 33kV – includes Cold Shrink for use in hazardous areas to provide electrical insulation and cable protection.

➡ Cable Cleats | Cable Lugs | Cable Transits | Cable Joints