Eltherm ELKM-A Heating Cable – PTFE Insulated Trace Heat Pipes, Tanks & Valves up to 260°C

Eltherm ELKM-A Heater Cable

T&D – Eltherm Heating Cables Distributor

Eltherm ELKM-A Heater Cables – Trace Heating

Eltherm ELKM-A resistance heating cables and tapes provide process temperature maintenance and frost protection to vessels, pipes, valves and small components up to 260° Celsius.

Eltherm ELKM-A

RESISTANCE Heater Cable

SPECIFICATION

  • Nominal Supply Voltage : 750V
  • Maximum Output : 30 w/m
  • Maximum Operating Temperature : 260ºC
  • Minimum Installation Temperature : -60° Celsius
  • Minimum Heater Cable Bend Radius : 2.5mm x outer diameter
  • Insulation : PTFE
  • Heat Conductor : Stranded, spirally wound for nominal resistance > 8,000Ω/km
  • Moisture Proof : Yes
  • Manufactured According To : DIN VDE 0253
  • Heating Cable Type : Resistance heating cable
Eltherm ELKM-A Heater Cable – Resistance Heating Process Temperature Maintenance

Eltherm ELKM-A Heater Cable – Resistance Heating Process Temperature Maintenance

Trace Heating Cable Selection Table – Eltherm ELKM-A

Contact T&D for technical guidance, heat loss calculations for pipework systems and optimum specification of the correct trace heater cable for your application.

Resistance heating cable application : frost protection and process heating.

Nominal Resistance Ω/kmCable Outer Diameter Approx (mm)Weight Approx (g/m)Temperature Coefficient (x 10-3/K)
1.955.81124.30
2.904.6734.30
4.404.2544.30
7.203.1334.30
10.003.0314.30
11.702.7304.30
15.002.6194.30
25.002.5173.00
31.502.9231.60
50.002.6171.60
65.002.4141.60
80.002.7200.90
100.002.5170.90
157.002.5170.45
180.002.2120.90
200.002.4140.45
260.002.2120.45
280.002.1100.38
328.002.5160.18
360.002.1100.45
430.002.3130.18
480.002.2120.18
600.002.1100.18
800.002.090.18
1000.002.1100.04
1470.002.190.04
1750.002.080.04
1900.002.2120.04
2900.002.190.04
4000.002.080.04
4700.001.980.15
6000.001.970.20
7000.002.070.15
8000.002.070.15

Eltherm ELKM-A resistance heating cables for frost protection up to nominal resistances up to 1,500,000Ω/km available on request.

Eltherm ELKM-A – Applications

  • Vessels, pipes, valves
  • Small components
  • Can be used in many industrial areas
  • Rotor blades
  • Marble plates

Eltherm ELKM-A heating cables provide temperature maintenance and frost protection to pipework and mechanical services in all industries – typical applications include industrial and hazardous area heating of process pipework, instrument lines and storage tanks to maintain viscosity or prevent frost damage as an integral work-task of plant Winterisation.

Eltherm ELKM-A Heater Cable

T&D provide value-added design services for process heating using trace heating cables and systems. Heating cables using constant wattage, self-regulating, mineral insulated and resistance heating technology provide frost protection and temperature maintenance to pipework, drums, tanks, IBC’s and valves.

RESISTANCE HEATING CABLES

Eltherm resistance heating cables are manufactured from a high-resistance heating conductor, PTFE insulated with protective braid and fluoropolymer outer jacket. Powered at specific voltage the resistance heat generated by the conductors provides electrical trace heating to pipes and vessels. Resistance heating cables will “burn-out” if overlapped unlike self-regulating trace heating cables.

High temperature resistance heating cables insulated with glass fibre provide electrical heating up to 800° Celsius.

Heating Cables - Eltherm Mineral Insulated Self Regulating Series Resistance Constant Wattage

Eltherm Heating Cables

Eltherm
Eltherm

Eltherm – Heating Cables, Heated Hoses, Surface Heating Mats & Drum Heaters

➡ Did you know? T&D Exports supports the global oil, gas and petrochem industries with an extensive range of Hazardous Area Electrical, Mechanical, Process & Instrumentation Equipment.

➡ Did you know? T&D also Distribute Eltherm Electrical Heated Hoses.