FLEXIM FLUXUS F709 Flowmeter – Ultrasonic Clamp-on Liquid Flowmeter (Permanent)

FLEXIM FLUXUS F709 Flowmeters

FLEXIM FLUXUS F709 Flowmeters – suitable for the measurement of aggressive, corrosive or toxic media in hazardous areas

FLEXIM manufacture market-leading ultrasonic flow meters – the FLEXIM FLUXUS F709 forms part of the permanent liquid flowmeter range.

Flexim FLUXUS F709 FlowMeter – Advantages

FLEXIM FLUXUS F709 Flowmeter

Flowmeters for Liquids & Gases

  • No downtime thanks to non-intrusive design
  • Minimum maintenance requirements as a result of the design of mounting fixtures and permanent coupling pads
  • Minimum installation and operating costs
  • Highest accuracy and reliability even under the harshest conditions
  • Bespoke application needs met thanks to varying electrical inputs and outputs
  • Comprehensive internal database with complete parameter set
  • Perfect solution for permanent thermal energy / BTU metering
  • Volumetric and mass flow measurement at up to +600°C hot pipes by using the patented WaveInjector Solution

Flexim FLUXUS F709 FlowMeter – Specifications

  • Flow channels – 1 or 2
  • Operating temperature of the flow meter transmitter – -10°C … 60°C
  • Degree of ingress protection – IP20 / NEMA 1 (Transmitter) ATEX and FM approved transducers are available
  • Flowmeter outputs – A variety of combinations are available from the following: current (0/4 mA … 20 mA), voltage, frequency, pulse, alarm
  • Flowmeter inputs – Maximum 4, Available are: Temperature (PT 100 4-wire), current, voltage
  • Communication Protocol – HART, ModBus and RS485
  • Media temperature (liquid) – -40°C … 200°C (-190°C … +600°C with High Temperature WaveInjector mounting fixture)
  • Pipe diameter range – 6 mm … 12.000 mm
  • Flow velocity range – 0,01 … 25 m/s
  • Measurement accuracy (standard) – ±1.6 % of reading, ±0.01 m/s
  • Measurement accuracy (extended calibration) – ±1.2 % of reading, ±0.01 m/s
  • Measurement accuracy (field calibrated) – ±0.5 % of reading, ±0.01 m/s
  • Repeatability – ±0.15% of reading, ±0,01 m/s
FLEXIM FLUXUS F709 - Ultrasonic Clamp-on Liquid Flowmeter

FLUXUS F709 Flowmeter. T&D Distribute FLEXIM Flowmeters, contact us.

FLEXIM FLUXUS F709 Flowmeter - Transducers

FLEXIM FLUXUS F709 Flowmeter – Transducers

Flow Meter Applications

FLEXIM FLUXUS F709 flowmeter uses include :

  • Chemical industry – measurement of almost any liquid including corrosive media and high temperature liquids such as water/glycol and thermal oils
  • Petrochemical industry – measurement of basic materials and high temperatures including tar, bitumen etc
  • Power plants – measurement of cooling water, fuel lines and reservoir water lines
  • Oil & Gas industry – measurement of all hydrocarbon liquids (Upstream, Midstream and Downstream)
  • Pharmaceutical industry –  measurement of ultra – pure fluids, even in PVC, PFA and glass pipes
  • Food & Beverage – hygienic non-intrusive measurement of liquids
  • Water & Wastewater industry – flow measurement on large diameter pipes and chemical flows in small pipes
  • Mechanical Engineering – measurement of cooling lubricant and leak detection of hydraulic systems


Also available: FLEXIM FLUXUS G709 Gas Flowmeter


Flexim Flowmeters - Portable Permanent Gas Liquid Flowmeters & Ultrasonic Meters

Flexim Flowmeters – Portable & Permanent (Liquids & Gases) & Ultrasonic Clamp-on

Flowmeters - Ultrasonic Non Invasive Flow Measurement Meters - FLEXIM

Flowmeters for Hazardous Area Liquid & Gas Flow Measurement. ATEX, IECEx Zone 2, EAC TR-TS, Inmetro Approved Ultrasonic Meters from FLEXIM.

➡ Did you know? FLEXIM FLUXUS ultrasonic clamp-on flowmeters are available for hazardous areas with IECEX / ATEX Certification – ask T&D about explosion proof offshore flowmeters.

Data Sheets