FLEXIM FLUXUS F801 – Ultrasonic Clamp-on Liquid Flowmeter (Offshore)

FLEXIM FLUXUS F801 Flowmeters

FLEXIM FLUXUS F801 Flowmeters – suitable for offshore and mining applications in hazardous areas with zone 1 and zone 2 classification

FLEXIM manufacture market-leading ultrasonic flow meters – the FLEXIM FLUXUS F801 forms part of the permanent liquid flowmeter range.

Flexim FLUXUS F801 FlowMeter – Advantages

FLEXIM FLUXUS F801 Flowmeter

Flowmeters for Liquids & Gases

  • FLEXIM FLUXUS F801 has two measurement channels and ATEX zone 1 approval
  • SS316 Stainless Steel flameproof housing that is water resistant
  • Virtually maintenance free and a very cost effective system
  • Stable, accurate and reliable measurement readings due to matched and temperature compensated transducers as well as innovative digital signal processing
  • Measurement available from temperatures ranging from -170°C up to 400°C for any pipe material, size or thickness
  • Independent of pressurization inside the pipe and flexible configurable outputs

Flexim FLUXUS F801 FlowMeter – Specifications

Flow channels 1 or 2
Operating temperature of the transmitter -20°C – 50°C
Degree of protection IP66
Functional Safety (acc. to IEC / DIN EN 61508) SIL2
Optional hazardous area classification ATEX and IECEx Zone 1 and 2
ATEX Zone 1 mining certification optional
Outputs 1 current, 1 binary (OC)
Also available 1 or 2 binary outputs (relay), 1 binary (OC) and 1 current, 1 binary (OC) and 1 frequency
Communication Protocol HART, Modbus, RS485
Media temperature -40°C … 200°C (-170 °C … +600 °C with WaveInjector mounting fixture for extreme temperatures)
Pipe diameter range 10 mm – 6500 mm
Flowmeter velocity range 0.01 … 25 m/s
Measurement accuracy
(standard)
±1.6 % of reading ±0.01 m/s
Measurement accuracy
(extended calibration)
±1.2 % of reading ±0.01 m/s
Measurement accuracy
(field calibrated)
±0.5 % of reading ±0.01 m/s
Repeatability ±0.15% of reading, ±0.01 m/s
Additional notes : Corrosion-proof and seawater-proof flow meter; resistant to saltwater mist. Connection enclosure and electronics enclosure are hermetically sealed. Connection compartment: increased safety, Output circuits: intrinsic safety. 240V or 24V DC power supply version of the transmitter available.
FLEXIM FLUXUS F801 - Ultrasonic Clamp-on Liquid Flowmeter

FLUXUS F801 Flowmeter. T&D Distribute FLEXIM Flowmeters, contact us.

Flow Meter Applications

FLEXIM FLUXUS F801 flowmeter uses include :

Oil Exploration and Extraction

  • Flow measurement of injection media, e.g. methanol
  • Flow measurement of injected and produced water
  • Flow Measurement at Separators
  • Measurement of the feeding process into sand separators for process management
  • Flow measurement of condensate
  • Measurement on high pressure systems

Also suitable for use in underground mining in explosive atmospheres.

Also available: FLEXIM FLUXUS G801 Gas Flowmeter

FLEXIM FLOW METERS

Flexim Flowmeters - Portable Permanent Gas Liquid Flowmeters & Ultrasonic Meters

Flexim Flowmeters – Portable & Permanent (Liquids & Gases) & Ultrasonic Clamp-on

Flowmeters - Ultrasonic Non Invasive Flow Measurement Meters - FLEXIM

Flowmeters for Hazardous Area Liquid & Gas Flow Measurement. ATEX, IECEx Zone 2, EAC TR-TS, Inmetro Approved Ultrasonic Meters from FLEXIM.

➡ Did you know? FLEXIM FLUXUS ultrasonic clamp-on flowmeters are available for hazardous areas with IECEX / ATEX Certification – ask T&D about explosion proof offshore flowmeters.

Data Sheets