FLEXIM FLUXUS F808 – Ultrasonic Clamp-on Liquid Flowmeter (Hazardous Area ATEX IECEx)

FLEXIM FLUXUS F808 Flowmeters

FLEXIM FLUXUS F808 – clamp-on flow meter for hazardous areas IECEX / ATEX Zone 1 approved

FLEXIM manufacture market-leading ultrasonic flow meters – the FLEXIM FLUXUS F808 forms part of the permanent liquid flowmeter range.

Flexim FLUXUS F808 FlowMeter – Advantages

FLEXIM FLUXUS F808 Flowmeter

Flowmeters for Liquids & Gases

  • Robust and rugged design with a rugged flameproof housing suitable for use in hazardous areas with (ATEX/IECEx and FM approved)
  • Matched, paired and wet flow calibrated
  • Accurate bi-directional, highly dynamic flow measurement of liquids
  • Free of wear, tear and abrasion as well as offering accurate measurements thanks to matched and temperature compensated transducers
  • Minimum installation and operating costs
  • Flexible configurable outputs and highly zero point stable and drift free
  • Simple install without having to tamper with housing

Flexim FLUXUS F808 FlowMeter – Specifications

  • Flow channels – 1
  • Operating temperature of the flow meter transmitter – -40 °C to +60 °C
  • Operating temperature of the transducers at pipe wall – -40 °C to +200 °C
  • Degree of ingress protection – IP66
  • Functional Safety (acc. to IEC / DIN EN 61508) – SIL2
  • Optional hazardous area classification – ATEX and IECEx Zone 1 and 2, FM Class I, Div. 1 / 2
  • Quantities of measurement – Operating flow rate, standard flow rate, volume flow, flow velocity
  • Flow velocity range – 0,01 to 25 m/s
  • Pipe diameter range – 10 mm up to 6,5 m
  • Repeatability – 0.15% of reading ± 0,01 m/s
  • Measurement accuracy (field calibrated) – ±0,5% of reading ± 0,01 m/s
  • Measurement accuracy (extended calibration) – ±1.2 % of reading ± 0,01 m/s
  • Measurement accuracy (standard) – ±1.6 % of reading ± 0.01 m/s
  • Data logger capacity – > 100.000 measured values
  • Loggable values – all physical quantities, totalized values and diagnostic values
  • Outputs – 1 current output and 1 binary output or 1 current output and Modbus
  • Communication Interface – HART, Modbus, RS485
  • Power supply – 100 to 240 V / 50 to 60 Hz or 20 to 32 V DC
FLEXIM FLUXUS F808 - Ultrasonic Clamp-on Liquid Flowmeter

FLUXUS F808 Flowmeter. T&D Distribute FLEXIM Flowmeters, contact us.

Flow Meter Applications

FLEXIM FLUXUS F808 flowmeter uses include :

  • Chemical industry – measurement of organic and inorganic hazardous media and acids. Also in polymerisation and infrastructural processes
  • Crude Oil Refining – monitoring of hydrocarbon product flows and in pipelines
  • Oil Exploration On & Offshore – measurement in FWKO and separator in-/ outlet, coalesces, scrubbers & reboilers, produced water injunction and chemical injunction


Hazardous Area ATEX & IECEx FlowmeteR



ATEX Flow Meter

Hazardous Area Classification :

Zone 1

Marking : CE  0637 Ex II2G II2D Ex db e IIC T6 Gb Ex tb IIIC T 100 °C Db Ta -40…+60 °C


IECEx Flow Meter

Certification ATEX : IBExU11ATEX1022 X

Certification IECEx :  IECEx IBE 11.0006X

What is ATEX?

  • ATEX: Is a European Directive which stipulates and certifies equipment, including flow meters, intended for use in hazardous areas and potentially explosive atmospheres. ATEX approved products are manufactured to minimize the occurrence and limit the severity of accidental explosions and are classified into Zone 1 & Zone 2 depending upon the incidence risk.


Flexim Flowmeters - Portable Permanent Gas Liquid Flowmeters & Ultrasonic Meters

Flexim Flowmeters – Portable & Permanent (Liquids & Gases) & Ultrasonic Clamp-on

Flowmeters - Ultrasonic Non Invasive Flow Measurement Meters - FLEXIM

Flowmeters for Hazardous Area Liquid & Gas Flow Measurement. ATEX, IECEx Zone 2, EAC TR-TS, Inmetro Approved Ultrasonic Meters from FLEXIM.

➡ Did you know? FLEXIM FLUXUS ultrasonic clamp-on flowmeters are available for hazardous areas with IECEX / ATEX Certification – ask T&D about explosion proof offshore flowmeters.

Data Sheets