Pressure Gauges – Electric Contact Pressure Gauge

Pressure Gauges - Electric Contact Pressure Gauge

Pressure Gauges – Electric Contact Pressure Gauge

Pressure Gauge

Electric Contact pressure gauge

Stewart Buchanan electric contact pressure gauges are suitable for many applications in industrial and process instrumentation – the pressure elements are available in copper alloy, stainless steel or special materials.

Unless advised differently all Stewart Buchanan pressure gauges are calibrated in accordance with EN837-1 to an accuracy of Class-1.

Electric contact pressure gauges are available to meet all applications and a high standard of quality ensures many years of trouble free operation.

Pressure Gauge – ELECTRIC CONTACT PRESSURE GAUGE

Technical Specification

Temperature  -20 to + 140 Deg.c. (Maximum of 80 Deg.c. for inductive and pneumatic types)
ContactsSingle or double contacts are standard with triple contacts available on special request
Standard Contact Device (Low Action)Contacts are intended for use where a heavy contact load is not required and the instrument is not subject to vibration
Magnetic Contact DeviceContacts can be used in any non-hazardous area and are largely insensitive to vibration
Inductive Contact Device (Intrinsically Safe Ex)Suitable for use in hazardous areas with explosion hazard rating up to (Ex) i G5
Pneumatic Contact Device Units serve as monitoring and regulating units in pneumatic systems and can be used in hazardous areas to the highest Ex-safety classification (Zone 0).

Stewart Buchanan Pressure Gauges – How To Order

The ordering process for Stewart Buchanan pressure gauges – below lays out exactly how you order with an example that can be followed.

  1. Ordering information state
  2. Pressure gauge model
  3. Nominal size
  4. Scale range
  5. Size of connection
  6. Optional extras required
  • Pressure Gauge Example
  1. 632
  2. 100mm
  3. 0-1000bar
  4. 1/2”NPT
  5.  Liquid Filled

Petro Chemical

Pressure gauge model : Stewart Buchanan 632

Nominal size : 100mm (4”)

Stainless Steel Case / Stainless Steel Internals

Direct Mounted Standard : 0 – 1000 Bar, 1/2”

NPT Optional extras=Liquid Filled

Stewart Buchanan Pressure Gauges

Stewart Buchanan Pressure Gauges

VALVES & MANIFOLDS from STEWART BUCHANAN

T&D also distribute the complete range of Stewarts 2, 3 an 5 valve manifolds including Ball Valves, Needle Valves, Double Block & Bleed (DDB) and Monoflanges for flow, pressure and level measurement applications.

Stewart Buchanan Valves

Stewart Buchanan Valves – 5 Valve Manifold

 ➡ Did you know? Thorne & Derrick service global industries including oil and gas and petrochemical with a wide range of Hazardous Area Electrical, Mechanical, Process & Instrumentation Equipment.

T&D are approved distributors of the ASCO range of solenoid valves for air, water, steam and gas flow control – this includes NACE MR0175, NACE MR0103, Safety Integrity Level (SIL 2, SIL 3, SIL 4) and hazardous area solenoid valves with ATEX and IECEx certification.

Solenoid Valves ASCO

T&D are Approved Channel Partners for ASCO Numatics.