Bespoke Heating Jackets : Imidodisulfuryl Chloride Heating In Hazardous Area Locations

Published 25 Sep 2019

T&D are the UK’s largest stockist of Drum & IBC Heater Jackets. Delivering UK & Worldwide.

T&D’s online library of Drum & IBC Heating applications is now updated to include the following : Imidodisulfuryl Chloride heating using bespoke heating jackets for containers in a hazardous area location.

Visit Silicone Heaters for details of electric surface heating solutions – flexible silicone heaters can be applied to heat the most complex shapes, geometries, curves and pipes.

HeatING JACKET Type

Drum
IBC
Bespoke ✓

area Classification

Safe Area
Hazardous Area (Zone 1 & Zone 2) ✓ II 3 G EExe IIC T4

HEATING FLUID, MEDIUM, CONTENTS

Water
Oil
Wax
Chemicals ✓
Petrochemicals (Solvents, Detergents, Adhesives, Other)
Food Ingredients (Liquid, Powdered, Granulated)
Other

HEATING APPLICATION

T&D, The Hazardous Area Heating Specialists

Frost Protection
Reduce Viscosity
Temperature Maintenance
Low Temperature Heating (0-20 degrees Celsius)
Medium Temperature Heating (21-50 degrees Celsius)
High Temperature Heating (50 degrees Celsius+) ✓
Other

Client required a ATEX heating jacket for a new product containing Imidodisulfuryl Chloride which required heating to 60ºC and maintaining at this temperature. A safe area jacket was designed and produced for R&D trials and once trials were complete, T&D were tasked with replicating the same product within an ATEX environment. Full design & consultation from R&D stage to finished product.

IBC Heating Jackets – T&D supply heating and insulating jackets for plastic or steel metal cage IBC’s for bulk liquid storage.

Bespoke Heating Jackets for chemical drums & ibcs

110 Volt
230 Volt ✓
Low Voltage

HEATING APPLICATION : DRUM, IBC, TANK OR VESSEL

25 Litres
50 Litres ✓
105 Litres
205 Litres
1000 Litres
Other

VESSEL MATERIAL

Steel ✓
Stainless Steel
Plastic
Cardboard
Other

HEAT UP TEMPERATURE

0-5 degrees Celsius
5-20 degrees Celsius
20-50 degrees Celsius
50-70 degrees Celsius ✓
70+ degrees Celsius
N/A (Frost Protection)

HEAT UP TIME REQUIREMENT

0-4 Hours
4-12 Hours
12-24 Hours
24-48 Hours ✓
N/A (Frost Protection)

Contact T&D for specification, support and sales of Electrical Heating Equipment for safe, industrial and hazardous area plant and equipment – we provide process temperature heating and frost protection (Winterisation) products for pipework, valves, IBC’s, drums and tanks, including hazardous area immersion heaters.

T&D – Largest UK Stockist of Heat Tracing Cables – UK & International Delivery

Invitation – network, engage, promote

Thorne & Derrick are inviting you to join LinkedIn’s fastest growing Discussion Group : Process & Hazardous Area Industries : Heat Tracing, Gas Detection, Fluid Control & Flow Measurement. News, projects, videos, promotions, whitepapers, jobs, webinars, press plus much more.