VEGA Conductive Level Switches

View Sub Products

VEGA Conductive Level Switches – Hazardous Area Zone 1 & Zone 2 ATEX & IECEx.

VEGA Conductive Level Switches – Hazardous Area Zone 1 & Zone 2 ATEX & IECEx.

VEGA conductive level switches provide level measurement for a wide range of applications and work on the conductive measuring principle. The probe detects the product resistance when being immersed. A low alternating current flows which is detected by the integrated electronics and converted into a switching command and the switching point can be determined via the mounting position or the length of the respective probe.

Typical applications of conductive level switches include overfill protection, pump control or dry run protection in vessels and pipelines.

VEGA Conductive Level Switches

Product Benefits

VEGA conductive level switches provide accurate, reliable level measurement of conductive liquids and are designed for industrial use in all areas of process technology.

Conductive probes detect the product resistance when their electrodes get covered by the product and a small alternating current, measured continuously by the electronics of the compact instrument or a separate signal conditioning instrument, is checked for amplitude and phase position and converted into a switching signal.

VEGA Level Switches For Hazardous Areas

VEGA Hazardous Area Level Switches & Level Measurement

VEGA Hazardous Area Level Switches & Level Measurement

VEGA Conductive Level Switches Product Range

VEGA conductive switches are used throughout many industries to provide reliable level measurement on a wide range of applications throughout industries where point level detection for liquids, pastes, powders or coarse bulk solids is required.

The range of VEGA conductive level switches are suitable for use in a wide range of industry applications and includes:

VEGA VEGAKON 61VEGA VEGAKON 66
VEGA EL 1VEGA EL 3
VEGA EL 4VEGA EL 6
VEGA EL 8
VEGA Sensors

Sensors, Switches & Transmitters For Continuous Level, Point Level & Pressure Measurement In Process & Hazardous Area Industries (Zone 1 & Zone 2 ATEX & IECEx Certified).

Thorne & Derrick are Process Instrumentation Specialists – contact us about VEGA level sensor equipment, we can provide a full system solution for level measurement and sensing of bulk solids, conductive and non-conductive liquids in industrial and hazardous area locations. For complete technical specifications, ordering information and application details about VEGA Conductive Level Switches please browse the product sections below.