Drum Heaters – Base Drum Heater IBDR-TSW/C

Drum Heater – Base Drum Heater IBDR-TSW/C

Drum Heater – Base Drum Heater IBDR-TSW/C

Thermocoax Isopad IBDR-TSW/C base drum heater are designed to provide medium flow and process temperature to 200 litre steel or plastic drums.

The IBDR drum heaters are constructed from a metal housing which has an insulated heating cable within which evenly distributes heat across the bottom of the drum container.

The temperature of the base drum heater is regulated by a mechanical thermostat with an ambient temperature range of -20ºC to +40ºC

An optional insulated lid can also be supplied to reduce heat loss through the top of the container and IBDR base drum heaters can be used alongside the IDR drum heater enclosure to further improve the heater capabilities.

T&D also offer a full range of IBC & Drum heating jackets and heaters.

IBDR Base Drum Heater

IBDR Base Drum Heater – Illustration

Base Drum Heater – ISOPAD IBDR – Technical Specification

Area Classification Non Hazardous Area
Ingress Protection IP52
Electrical Protection Class Class I
Ambient Temperature Range -20ºC to +40ºC
Height 75mm heating surface
Inner Diameter N/A
Outer Diameter 570mm
Heater Type Resistance Heating Cable
Material Various Alloys
Material of Heater Insulation Glass Silk
Carrier Woven Glass Silk
Material of Thermal Insulation Mineral Fibre
Thickness 50mm
Outer Protection Sheet Steel
Paint Matt Black Heat Resistant & Hammer Trimite Silver-Grey
Fixation & Closure Type N/A
Connection Lead Length 3m
Lead Cross Section 2.5mm²
Maximum Operating Temperature 80ºC
Connection Lead Insulation Material Armoured PVC
Thermostat (Type) TSW
Sensor Type Capillary Tube
Controller Range 50 to 300ºC
Ingress Protection IP65
Maximum Ambient Temperature -20ºC to +80ºC
Housing Dimension (LxWxH) 170 x 150 x 100mm
Housing Material Aluminum Cast
Frequency 50-60Hz
Nominal Operating Voltage 230 Vac (~1ph)
Nominal Power 900W
Maximum Operating Temperature 300ºC
Options Alternative controller setting range 0°C to +43°C or +30°C to +110°C
Additional insulation-lid for reduction of heat loss (see order information accessories)

 

Base Drum Heater – ISOPAD IBDR – Product Specification

Part Number For Standard Sizes (ltr) Height Inner Diameter (ID) (mm) Outer Diameter (OD) (mm) Nominal Power (W) Nominal Voltage (Vac) Weight (kg)
IBDR-TSW-C 200 75mm N/A 570mm 900W 230 ~1ph 20

 

HEATING DRUMs, ibc CONTAINERS & cylinders
Drum Heating - Viscosity

Viscosity Simulation: Substances have different viscosities – the substance on the left has lower viscosity than the substance on the right.

Applications

Frost Protection
Reduce Viscosity
Temperature Maintenance
Low Temperature Heat Up 0-20° Celsius
Medium Temperature Heat Up 21-50° Celsius
High Temperature Heat Up 50° Celsius

Service PROMISE

Quotations same day, delivery 2-3 Days (Overnight & International options) from the UK’s leading distributor of Industrial & Hazardous Area Heating Equipment – ask about custom silicone heating pads and mats for surface heat distribution to complex shapes.

Drum Heating Specialists

Hazardous Area Drum Heaters (ATEX Certified) For Heating Drums In Zone 1 & Zone 2 Locations.

dRUM hEATING JACKETS

Watch our video to understand more about the features and design of our HTSD Drum Heaters.

Drum Heaters Industries

Heating Drums: T&D stock drum heaters for industrial, non-hazardous and ATEX certified versions for potentially explosive atmospheres and hazardous area locations, Zone 1 & Zone 2.

➡ For further information about the complete range of Drum Heaters please browse the product sections below – for intermediate bulk container applications, visit IBC Heaters.

Data Sheets