Flameproof Fluorescent Light Fitting Zone 1 2 21 22 | ATX FDB258BUM

Appleton ATX FD Series Hazardous Area Lighting | Zones 1 & 2 21 & 22

Flameproof light fittings

Zones 1 & 2 – Zones 21 & 22

Product Category: Hazardous Area Lighting | Flameproof Fluorescent Light Fittings

Appleton ATX FDB258BUM

Flameproof ATX FD Series cylindrical fluorescent light fittings manufactured by Appleton ATX can be installed in hazardous areas designated as Zone 1, Zone 2, Zone 21 and Zone 22. The design of this flameproof lighting product along with its high degree of corrosion resistance, make them an ideal light fitting to provide hazardous area lighting for indoor or outdoor areas that are exposed to dirt, water, moisture and corrosive conditions.

Explosion proof and flameproof light fittings are typically used in petrochemical facilities, underground tunnels, oil refineries, pulp and paper mills, painting, sewage and water treatment facilities, warehouses, and other general manufacturing facilities.

LIGHT FITTING SPECIFICATION

The Appleton ATX FD Series allows quick and easy installation of fluorescent lighting fixtures with 2G11 or Bi-pin G13 lamp holders
The light fittings are supplied with an energy efficient and self inducting ferromagnetic ballast on a removable gear tray
They feature easy connection to wire and disconnect with plug-in terminal blocks
Supplied with an external and internal ground/earth connection
Easy access to lamps through threaded entry cap. The light fittings are available as standard duty or with emergency battery back-up
Supplied with O-ring for improved ingress protection – IP Rating: IP66/68
Light fitting is supplied with one M20 blanking plug
Impact resistant borosilicate glass sealed tube – Impact Resistance Rating: IK08
3 lamp versions: 2 x 58 Watts | 2 x 36 Watts | 2 x 18 Watts
See also: Zone 1 Fluorescent | Zone 2 Fluorescent
Light Fittings ATEX Zone 1 | Light Fittings ATEX Zone 2
Floodlights ATEX Zone 1 | Floodlights ATEX Zone 2

Hazardous Area Lighting ATEX - Appleton

Appleton ATX Flameproof Fluorescent Light Fittings
Appleton ATX Order Code	Wattage	Number of Lamps	Gas Group	Light Fitting Model	Light Fitting Weight	Volume dm³ (in³)
FDB258BUM	58 Watts	2	IIB	1.5	18.2 kg \| 40.12 lbs	119 (7261.83)

For replacement of conventional fluorescent light fittings please refer to Zone 2 LED type hazardous area lighting

t rating (Gas) and surface temperature (dust) table

Light Fitting Model	Flameproof Lamp Type	Gas – T Rating					Dust – Surface Temperature
		Without External Reflector			With External Reflector		Without External Reflector	With External Reflector
		Ta = 40°C (104°F)	Ta = 55 °C (131 °F)	Ta = 70 °C (158 °F	Ta = 40 °C (104 °F)	Ta = 55 °C (131 °F)
1.5	Fluorescent G13 \| Magnetic Ballast 1 x 58 Watts/2 x 58 Watts	T6	T6	N/A	T6	T5	80°C (176°F)	95°C (203°F)
	Fluorescent G13 \| Electronic Ballast 1 x 58 Watts/2 x 58 Watts/3 x 58 Watts	T6	T5	N/A	T6	T5	84 °C (183 °F)	95 °C (203 °F)