EXHEAT FUH Flameproof Fan Heaters – ATEX Certified Zone 1 & Zone 2
ATEX Flameproof Fan Heaters
Zone 1 & Zone 2 (IIA, IIB, IIC) Hazardous Areas
The EXHEAT FUH range offers a compact high capacity air heating solution and can be provided with temperature ratings of T3 and suitable for ambient temperatures from -40°C to +40°C.
EXHEAT FUH flameproof fan heaters are certified to meet ATEX equipment directive and CU TR (formerly GOTS) standards and is designed flexibility, allowing it to be supplied to clients’ capacity and power supply requirements.
EXHEAT FUH Flameproof Fan Heaters
ATEX Certification & Installation
Certification: ATEX II 2 G
Ex d IIC T3 Gb for use in Zone 1 and 2 areas
CU TR (formerly GOST)
Prior to installing the EXHEAT FUH flameproof fan heaters a visual inspection must be carried out and the heater must be protected by a suitably rated over current device.
To install the heater carefully remove from the packaging and check for damage. The fan heater should be mounted upright using only the suspension points at the top of the unit and appropriate mounting brackets.
The heater must be positioned to allow unrestricted entry of air at the back and exit at the front via the adjustable louvers. A minimum of 2 metres clearance must be maintained in front of the heater.
EXHEAT FUH Flameproof Fan Heaters Applications
- Oil refineries
- Petrochemical plants
- Offshore platforms
- Ammunition stores
- Sewage plants
- Solvent recovery plant
- Drilling floor
- Frost protection
- Lube oil coolers for gas turbines
EXHEAT FUH Flameproof Fan Heaters Product Range
Suitable for Zone 1 & Zone 2 (IIA, IIB, IIC) gas groups.
|Fan Heater Model||Hazardous Area||240V||380V||415V||440V||480V||Weight (Kg)|
|EXHEAT FUH 9||Zone 1 & Zone 2||–||7||9||10||9||120|
|EXHEAT FUH 12||Zone 1 & Zone 2||–||10||12||13||12||120|
|EXHEAT FUH 15||Zone 1 & Zone 2||–||13||15||17||15||145|
|EXHEAT FUH 20||Zone 1 & Zone 2||–||17||20||–||20||145|
|EXHEAT FUH 30||Zone 1 & Zone 2||–||25||30||–||30||145|
HAZARDOUS AREA ELECTRICAL, MECHANICAL, PROCESS & INSTRUMENTATION SPECIALISTS
Thorne & Derrick International distribute Electrical, Mechanical, Process & Instrumentation Equipment to the global hazardous area industries and are approved vendors to most leading oil, gas and petrochemical companies and their EPC’s.
T&D supply ATEX & IECEx Certified equipment for the detection, metering, flow measurement and heat tracing of potentially explosive gases in hazardous areas Zone 1 and Zone 2.
➡ Did you know? T&D have a dedicated Exports and Hazardous Area Sales Team, send an enquiry.
➡ Did you know? T&D are Thermon, The Heat Tracing Specialists, largest UK stockist.