High Temperature Heating Cable | Eltherm ELK-Q 0.6 | For Glass, Quartz & Ceramic Materials up to 900°C
Eltherm ELK-Q High Temperature Heating Cable – Resistance Heating Process Temperature Maintenance
Eltherm ELK-Q high temperature heating cable and tapes provide process temperature maintenance and frost protection to vessels, pipes, valves and small components up to 900° Celsius.
Please Note: This product has been discontinued. Please Contact Thorne & Derrick for an alternative!
High Temperature Heating Cable – ELTHERM ELK-Q
SPECIFICATION
- Nominal Supply Voltage : 230V
- Maximum Output : 175 w/m
- Maximum Operating Temperature : 900ºC
- Minimum Installation Temperature : Not restricted
- Diameter: 4mm
- Minimum Heater Cable Bend Radius: 5 x outer diameter
- Insulation : Quartz Textile
- Cold Lead Length (Both Ends) : 1.2m without plug
- Moisture Proof : No
- Protection Class: Depending on installation
- Manufactured According To : DIN VDE 0721 T2
- Final Inspection According To: DIN VDE 0721 T2, 1.5kV AC – 1 min
- Heating Cable Type : High Temperature Heating Cable
high temperature Heating Cable Selection Table – Eltherm ELK-Q
Contact T&D for technical guidance, heat loss calculations for pipework systems and optimum specification of the correct trace heater cable for your application.
High temperature heating cable application : frost protection and process heating.
| Eltherm ELK-Q High Temperature Heating Cable – Designation | Heated Cable Length (m) | Nominal Output (W) | Eltherm Order Code |
| ELK-Q-0.6 | 0.6 | 106 | 0160003 |
Other lengths of ELK-Q high temperature heating cable are available upon request.
Resistance Tolerance: +/- 5%
Lengths tolerance ± 2%, max ± 0.25m
Eltherm ELK-Q – Applications
- Heat tracing on glass, quartz and ceramic devices
- Devices and systems with high output needs
- Laboratory & research applications
Eltherm ELK-Q heating cables provide temperature maintenance and frost protection to pipework and mechanical services in all industries – typical applications include industrial and hazardous area heating of process pipework, instrument lines and storage tanks to maintain viscosity or prevent frost damage as an integral work-task of plant Winterisation.
T&D provide value-added design services for process heating using trace heating cables and systems. Heating cables using constant wattage, self-regulating, mineral insulated and resistance heating technology provide frost protection and temperature maintenance to pipework, drums, tanks, IBC’s and valves.
RESISTANCE HEATING CABLES
Eltherm resistance heating cables are manufactured from a high-resistance heating conductor, PTFE insulated with protective braid and fluoropolymer outer jacket. Powered at specific voltage the resistance heat generated by the conductors provides electrical trace heating to pipes and vessels. Resistance heating cables will “burn-out” if overlapped unlike self-regulating trace heating cables.
High temperature resistance heating cables insulated with glass fibre provide electrical heating up to 800° Celsius.
Eltherm Heating Cables
➡ Did you know? T&D Exports supports the global oil, gas and petrochem industries with an extensive range of Hazardous Area Electrical, Mechanical, Process & Instrumentation Equipment.
➡ Did you know? T&D also Distribute Eltherm Electrical Heated Hoses.
High Temperature Heating Cable – Eltherm ELK-Q – For Glass Quartz Ceramic Materials up to 900C – Specification
Download
