Wolf Micro & Mini Torch (Zones 0, 1, 2, 20, 21 & 22 Hazardous Areas)

wOLF

Hazardous Area Torches

Wolf M-10 | Wolf M-20 | Wolf M-40 | Wolf M-60

Torches for Zone 0, 1, 2, Zone 20, 21, 22 Hazardous Area Lighting

Wolf Micro & Mini Torches are ATEX certified torches for safe use in hazardous area Zone 0,1 & 2 (Gas, Vapour & Mist Explosive Atmospheres) and Zone 20, 21 & 22 (Dust Explosive Atmospheres) – T&D are Approved Distributors for the Wolf Lighting including handlamps, torches, headtorches and floodlights.

The Wolf Micro & Mini torches have an ergonomic design and are constructed from high quality thermoplastic resin, with excellent impact and chemical resistance and the polycarbonate lens is set-back within the lens ring to minimise risk of damage.

All models of the Wolf Micro & Mini torches have a lanyard hole (M-10 Micro supplied with neck cord), an integral pocket clip for secure retention and to prevent roll on a flat surface, and a push-button for single-handed switching, which is shrouded to guard against accidental operation. All models are certified IP67, sealed against water/dust ingress.

The M-10 Micro, M-40 and M-60 Mini torches use an LED light source and are approved for Category 1 equipment for use in Zones 0, 1 and 2 and the M-20 Mini torch uses a Xenon filament bulb and is approved as Category 2 equipment for use in Zones 1 and 2.

ATEX Torches For Hazardous Areas

Wolf Micro & Mini torches provides reliable and versatile hazardous area lighting according to both ATEX Directive and IECEx standards – the torches utilise LED and Xenon technology as a light source and are used for safe lighting in hazardous area Zones 1 and Zones 2 (potentially explosive gas) and Zones 21 and Zones 22 dust atmospheres (IIIA & IIIB Groups) with T4/T5 temperature classification. Zone 0 and 20 version torches are available.

ATEX & IECEx Certified For Explosive Atmospheres

An overview of the Wolf Micro & Mini Torches range to provide portable lighting in explosive atmospheres:

Wolf M-10 Spot Beam Torch Zone 0
Wolf M-20 Spot Beam Torch Zone 1
Wolf M-40 Spot Beam Torch Zone 0
Wolf M-60 Spot Beam Torch Zone 0
ATEX Certification: II 1 GD Ex ia IIC T5 (Ta=50ºC) tD A20 IP67 T80ºC (M-10)
ATEX Certification: II 2 GD Ex ib IIC T4 (Ta=50ºC) tD A21 IP67 T80ºC (M-20)
ATEX Certification: II 1 GD IIC T4 (-40ºC ≤ Ta ≤ +50ºC), Ex ia IIIB T125ºC Da IP67 (M-40 & M-60)
Hazardous Area Zone 1 & 2 Gas Groups IIA, IIB & IIC (Wolf M-20)
Hazardous Area Zone 0, 1 & 2 Gas Groups IIIA, IIIB & IIIC (Wolf M-10, M-40 & M-60)
Temperature Classification (Gas) T5 (M-10) T4 (M-20, M-40 & M-60) | See more information about T Class Ratings
Maximum Surface Temperature (Dust) 95°C (M-10), 125ºC (M-40), 130ºC (M-60)
More Technical Information Hazardous Area Zones

Wolf Micro & Mini Torch

ATEX Torches

ATEX and IECEx Certified torches
Gas: Hazardous Area Zone 1 & Zone 2
Dust: Hazardous Area Zone 21 & Zone 22
T4/T5 temperature class
Ultra small size torch
Lightweight, ergonomic design
Proven impact resistance
Single handed switching
Switch protection shroud
Integral pen style pocket clip
IP67 water and dust tight
Gas and Dust Approval
Hazardous Area Group I Mining Approval

ATEX Certified Torch

Zones 0, 1, 2, 20, 21 & 22 Hazardous Areas

Zone 0, Zone 1 & Zone 2 Gas
Zone 20, Zone 21 & Zone 22 Dust
See below table for ATEX Certification details including T-Rating, Gas Groups and Zone locations

The Wolf Micro & Mini range are torches manufactured by Wolf Safety Lamp to provide lighting in Zone 1, Zone 0, Zone 21 or Zone 20 hazardous areas – the LED / Xenon torches are for use in potentially explosive atmospheres according to the ATEX Directive.

Wolf Micro & Mini Torch

WOLF Micro & mini Torch Technical Information

The following table explains the technical specification differences for the Wolf Micro & Mini range of torches – should you require support or advice on selecting the correct hazardous area torch please do not hesitate to contact us.

Wolf Part Reference		Wolf M-10	Wolf M-20	Wolf M-40	Wolf M-60
Torch Description		LED Micro Torch	Xenon Mini Torch	LED Mini Torch	1W LED Mini Torch
Hazardous Area Code (ATEX & IECEx)	Industrial	II 1 GD Ex ia IIC T5 (Ta=50ºC) tD A20 IP67 T80ºC	II 2GD Ex ib IIC T4 tD A21 IP67 T80ºC	II 1GD IIC T4 Ga (-40ºC ≤ Ta ≤ +50ºC), Ex ia IIIB T125ºC Da IP67	II 1GD IIC T4 Ga (-40ºC ≤ Ta ≤ +50ºC), Ex ia IIIB T130ºC Da IP67
	Mining	I M1 Ex ia I IP67	I M2 Ex ib I IP67	I M1 Ex ia I, Ma. IP67	I M1 Ex ia I Ma IP67
Type of Protection		“ia/ib” Intrinsic Safety
Area of Hazardous Classification (Gas)		Zones 0, 1 and 2	Zones 1 and 2	Zones 0, 1 and 2	Zones 0, 1 and 2
Temperature Classification (Gas)		T5	T4
Area of Hazardous Classification (Dust)		Zones 20, 21 and 22	Zones 21 and 22	Zones 20, 21 and 22	Zones 20, 21 and 22
Maximum Surface Temperature (Dust)		80ºC		125ºC	130ºC
Ambient Temperature		-20ºC to +50ºC	-20ºC to +40ºC	-40ºC to +50ºC
ATEX Certificate		ATEX Baseefa06ATEX0084X / IECEx BAS 06.0023
Enclosure		Impact resistant thermoplastic, electrostatic non-hazardous
Lens		Polycarbonate
Beam Type		Medium Spot	Narrow Spot	Medium Spot
Light Source	Part Number	–	M-201	–	–
	Type	1 x 5mm LED White (Nichia)	Xenon Filled Filament Bulb	3 x 5mm LED White (Nichia)	1 x High Power Cree LED
	Rating	–	2.3V 0.3A	–	1 Watt
	Output	30cd	15lm	3 x 30cd	Up to 90lm
	Life	25,000 Hours	30 Hours	25,000 Hours
Power Source	Type	LR44 Primary Cells to IEC60086	LR03 Primary Cells to IEC60086	LR1 Primary Cells to IEC60086
	Part Number	M-102 (4 Pack)	M-202 (2 Pack)	M-402 (3 Pack)
	Volts	4 x 1.5V	2 x 1.5V	3 x 1.5V
Light Duration		Up to 2 hours	Up to 2.3 hours	Up to 10 hours	Up to 1.5-3.5 hours (Depending on battery make and type)
Ingress Protection		IP67 to EN60529: 1992
Weight (Including Cells)		25g	60g