Fluorescent Light Fittings | Twin 18 Watts Lamps | Hazardous Area | ATX FEB218BUSA

FLUORESCENT light fitting

Twin 18 Watt Lamps

Appleton ATX FEB218BUSA

Zones 1 & 2 – Zones 21 & 22 | Increased Safety

The Increased Safety FE Series of Zone 1 & Zone 2 fluorescent light fittings, manufactured by Appleton ATX, provide added protection for a wide variety of locations. The light fittings are suited to applications in both non-hazardous as well as onshore or offshore hazardous areas with a corrosive environment or potentially explosive atmosphere – these fluorescent light fittings can be installed where detergents or severe weather may be a problem.

ATX FE nonmetallic fluorescent light fittings suitable for Zone 1 & Zone 2 hazardous areas are protected against the elements by a gasket, produced using elastomer, and a latch assembly to ensure a consistent and durable seal which is resistant to water and dust ingress. The lens, body and hardware are all corrosion-resistant, thus making the Increased Safety FE Series an ideal hazardous area lighting option for locations such as pulp and paper mills, oil refineries, warehouses, petrochemical facilities, food processing plants and underground tunnels.

These fluorescent light fittings are available as a standard variant or with an emergency battery back-up to offer a wide range of Increased Safety features. A positive safety switch disconnects the power to lamps and ballast to allow safe servicing and maintenance in hazardous locations.

• Category: Hazardous Area Lighting
• Product: Fluorescent Linear Light Fitting
• Light Fitting Type: Fluorescent
• Manufacturer: Appleton ATX
• Range: FE Series
• Technology: Fluorescent Lighting – Increased Safety
• Number of Lamps: 2
• Lamp Type: G13 Bi-pin
• Power: 18 Watts
• Voltage Range: 110/254
• Volume: 32.3 dm³ (1971.07 in³)
• Temperature Rating: T-Rating: T5 to T4
• Ambient Temperature: -40 °C to +55 °C (-40 °F to +131 °F)
• Fluorescent Light Fitting Weight: 5.5 kg (12.13 lbs)
• For Armoured Cable
• Cable Entries: 2 x M20 threaded entries with a brass earth continuity plate at one endand one M20 plugged clearance entry
• ATX FEB218BUSA is ideal for use in Zone 1 and Zone 21 as well as Zone 2 and Zone 22 hazardous area locations
• Light Fittings ATEX Zone 1 | Light Fittings ATEX Zone 2
• Floodlights ATEX Zone 1 | Floodlights ATEX Zone 2

Fluorescent Light Fitting Dimensions

Ordering fLUORESCENT Light Fittings

The following Appleton ATX part number generator explains the process for selecting the correct fluorescent light fitting for Zone 1 & Zone 2 hazardous area lighting applications using the FE range of Increased Safety Ex e nonmetallic fluorescent light fittings.

FE ↓	B ↓	2 ↓	18 ↓	BU ↓	S ↓	A ↓	C ↓
Series:	Lamp Type:	Number of Lamps:	Wattage:	Voltage:	Mounting Version:	Cable Type:	Options: (options must be  listed alphabetically)
FE – FE Series Zone 1, 2, 21, 22 ATEX/IECEx Certified	B – Bi-pin (G13) M – Mono Pin (Fa6)	1 – Single 2 – Double 3 – Three Lamps	18 – 18 Watts 36 – 36 Watts 58 – 58 Watts	BU – 110 to 254 Vac/Vdc 50/60 Hz	P – Pole Mount S – Surface/Suspension Mount Standard Wiring T – Surface/Suspension Mount Through Wiring L – Surface/Suspension Mount Dual Loop in/out Through Wiring (single phase)	A – Armored M20 N – Unarmored M25 U – Unarmored M2	C – Silicon Coating for Diffuser E – 3 Hour Emergency Battery: 6 V – 4 Ah (18W) 6 V – 7 Ah (36W, 58W) E9– 90 Minute Emergency Battery: 6 V – 4 Ah (18W) 6 V – 7 Ah (36W, 58W) L – Level Gauge Light Fitting N – No Switch

Data Sheets

• Appleton ATX FE Series Fluorescent Light Fitting | Hazardous Area Zones 1 2 & 21 22
  Download