Increased Safety Lighting | Ex eb Lighting | Hazardous Area Technor LED EVF-P Lighting

Increased Safety Lighting

EXPLOSION PROTECTION EX Eb

LED Lighting for Zone 1, Zone 21, Zone 2, Zone 22 Hazardous Area Lighting Applications

Thorne & Derrick, the Specialist Distributors of Hazardous Area Lighting can provide competitive prices and supply from stock the complete range of Technor products including electrical enclosures and junction boxes.

Technor’s LED EVF-P is an LED Ex eb lighting fixture suitable for hazardous area lighting and offers offers Ex-e IIC mode of protection and has a polycarbonate lamp housing which is three layers extrusion UV resistant.

Technor LED EVF-P lighting is classified to international hazardous area classifications with ATEX and TRCU certification, with ingress protection IP66 and an operational ambient temperature range of -20°C to +55°C.

Circular shape of the ex lighting grants the best possible “CX” factor, therefore it is less affected by wind dusts, no flat surfaces to avoid pollution and dirty bunching.

Technor LED EVF-P lighting fixtures are manufactured with a high resistance cylindrical polycarbonate lamp housing with end cups made from corrosion resistant copper free aluminium. Optionally an off-shore painting cycle can be provided to allow for use within marine environments and all LED EVF-P fixtures are supplied ready for loop in-loop out facility with 4sqmm cable.

Technor LED EVF-P – Technical Features

Material	End cups in aluminium with low content of copper / Light housing in polycarbonate
IP rating	IP66/IK10 according to EN 62262:2002
Ambient temperature range	-20°C to +55°C
Approvals	TÜV CY 17 ATEX 0205846 X
Gaskets	O-ring made of Nitrile Rubber (NBR)
Surface treatment	End cups painted by green colour polyurethane painting cycle RAL6003 (other colour available upon request)
Entries	N° 2 entries M20x1.5. One plugged-off by Ex d brass nickel chrome plated plug and relevant gasket.
Hardware and screws	AISI304 Stainless steel external hardware and screws
Lamps	Extended long life new LED technology with CRI > 85
Ballast	Electronic
Rated Operation Voltage (UE)	220-240Vac (normal and emergency service) 198-278Vdc (normal service)
Frequency	0/50 – 60 Hz
Power Factor	>0.95
Accessories available upon request	AISI304 Pole mounting kit / AISI304 Ceiling / Wall mounting kit / AISI304 Suspension mounting kit / 3° bottom entry M20x1,5 / AISI304 protection guard / Mounting kit in stainless steel AISI316

Technor LED EVF-p Lighting – Normal Service

Technor Part Number	Code	Power (W)	Dimensions (mm)			Weight (kg)
			A	B	C
EVF-P 116	A030311160011	16	764	176	194	–
EVF-P 216	A030312160011	2X16	764	176	194	–
EVF-P 132	A030311320011	32	1374	176	194	–
EVF-P 232	A030312320011	2X32	1374	176	194	–

 

Technor LED EVF-p Lighting – 90′ Emergency Service

Technor Part Number	Code	Power (W)	Dimensions (mm)			Weight (kg)
			A	B	C
EVF-P 132 LE-P-90	A030321320111*	32	1374	176	194	–
EVF-P 232 LE-P-90	A030322320111*	2X32	1374	176	194	–
EVF-P 116 LE-P-90	A030321161111	16	764	176	194	–
EVF-P 132 LE-P-90	A030321321111*	32	1374	176	194	–

* 180′ emergency version available upon request

HAZARDOUS AREA CERTIFICATION & MARKING FOR Lighting

II 2 GD

• Ex eb mb op is IIC T4 Gb (normal service)
• Ex eb db mb op is IIC T4 Gb (emergency service)
• Ex tb IIIC T135°C Db IP66

under IEC Ex directive, junction boxes and enclosures are suitable for IIC group of gases/dusts only 

Approvals

TÜV CY 17 ATEX 0205846 X

Data Sheets

• TECHNOR EVF-P TL2 LED
  Download