Electrical Enclosures & Junction Boxes – Zone 1 & Zone 2 Hazardous Area ATEX
Electrical Enclosures & Junction Boxes
Safe & Hazardous Areas
- Stainless Steel Enclosures & Junction Boxes
- Aluminium Enclosures & Junction Boxes
- GRP Enclosures & Junction Boxes
- GRP Assembled Enclosures & Junction Boxes
- Fire Rated Enclosures & Junction Boxes (IEC311 BS6387)
- High Voltage Hazardous Area Electrical Enclosures & Junction Boxes
ZONE 1 HAZARDOUS AREA
Zone 1 is a classified hazardous area location in which an explosive atmosphere consisting of a mixture with air of flammable substances in the form of gas, vapour or mist is likely to occur in normal operation occasionally.
ZONE 2 HAZARDOUS AREA
Zone 2 is a classified hazardous area location in which an explosive atmosphere consisting of a mixture with air of flammable substances in the form of gas, vapour or mist is not likely to occur in normal operation but, if it does occur, persists for a short period only.
T&D are Main Distributors for Abtech – this includes their ranges of hazardous area enclosures and junction boxes for LV-HV electrical power distribution. Enclosures can be drilled to accomodate single or multiple cables, modified and populated with cable terminals.
Fully ATEX certified enclosures and junction boxes for hazardous area, high voltage and industrial applications can be designed and supplied customised to suit specific requirements.
Typical applications for the junction boxes include the distribution of low voltage electrical supply for power and lighting systems in onshore and offshore environments. Hazardous area junction boxes can also be configured as power supply boxes to control heat tracing systems including series heating, self-regulating and constant wattage parallel trace heating cables.
Ex d Flameproof Enclosures
Hazardous Area ZONE 1 2 21 22
Ex d flameproof enclosures provide power distribution in hazardous areas and can be configured with appropriate cable terminals to suit requirements – various sizes of electrical enclosures are available in aluminium, stainless steel and cast iron. For explosion protection types Ex e and Ex ia enclosures, a wide range of terminal and junction boxes is available are stainless or mild steel – GRP glass-reinforced polyester flameproof enclosures are also available.
Ex d flameproof motor starters can also be specificed and supplied to provide explosion-proof power switching in Zone 1 & 2 (gas) and Zone 21 & 22 (dust) potentially explosive atmospheres.
➡ For complete technical specifications, dimensions, ordering details and hazardous area certifications please refer to the product sections below – should you require help please call us or complete our online Hazardous Area Junction Box enquiry form.