EXHEAT FCR Hazardous Area Convector Heaters – ATEX Certified Zone 1 & Zone 2
ATEX Convector Heater
Zone 1 & Zone 2 (IIA, IIB, IIC) Hazardous Areas
The EXHEAT FCR offers an exceptionally long life thanks to the finned stainless steel elements and heavy duty folded steel construction. The FCR range can be provided with temperature ratings of T2, T3 and T4 and is suitable for ambient temperatures from -60°C to +40°C.
EXHEAT FCR hazardous area convector heaters are certified to meet ATEX equipment directive and IECEx standards and are suitable for wall or floor mounting with an optional room temperature control thermostat.
EXHEAT FCR Hazardous Area Convector Heaters
ATEX Certification & Installation
Certification: ATEX / IECEx II 2 G
Ex e IIC T2 to T4 Gb Zone 1 and 2
CU TR (formerly GOST)
Prior to installing the EXHEAT FCR hazardous area convector heaters a visual inspection must be carried out and the heater must be checked to ensure the insulation resistance reading is above 2MΩ per element at 500 volts dc.
If the heater fails this test the power and control circuits must be isolated.
To install the heater carefully remove from the packaging and check for damage. The convector heater should be fixed into place using the pre-drilled holes and all terminal connections checked for tightness prior to energising.
The appliance must be securely fitted to a wall or floor using only the brackets provided and the orientation of the heaters must be strictly adhered to with the feet facing down at all times.
EXHEAT FCR Hazardous Area Convector Heaters – Applications
- Aircraft hangers
- Fuel servicing areas
- Chemical plants
- Offshore installations
- Battery stores
- Gas installations
- Container heating
- Storage areas
- Frost protection
EXHEAT FCR Hazardous Area Convector Heaters Product Range
Suitable for Zone 1 & Zone 2 (IIA, IIB, IIC) gas groups.
|Convector Heater Model||T Class||Hazardous Area||Watts Rating||Voltage||Weight (Kg)|
|EXHEAT FCR 1||T2-T4||Zone 1 & Zone 2||1.0||240||17|
|EXHEAT FCR 1/110||T2-T4||Zone 1 & Zone 2||1.0||110||17|
|EXHEAT FCR 2||T2-T4||Zone 1 & Zone 2||2.0||240||32|
|EXHEAT FCR 2/110||T2-T4||Zone 1 & Zone 2||2.0||110||32|
|EXHEAT FCR 3||T2-T4||Zone 1 & Zone 2||3.0||240||47|
|EXHEAT FCR 3/145||T2-T4||Zone 1 & Zone 2||3.0||415/3||47|
Hazardous Area ELECTRICAL, MECHANICAL, PROCESS & INSTRUMENTATION Specialists
Thorne & Derrick International distribute Electrical, Mechanical, Process & Instrumentation Equipment to the global hazardous area industries and are approved vendors to most leading oil, gas and petrochemical companies and their EPC’s.
T&D supply ATEX & IECEx Certified equipment for the detection, metering, flow measurement and heat tracing of potentially explosive gases in hazardous areas Zone 1 and Zone 2.
➡ Did you know? T&D have a dedicated Exports and Hazardous Area Sales Team, send an enquiry.
➡ Did you know? T&D are Thermon, The Heat Tracing Specialists, largest UK stockist.