Abtech BPGA125 Enclosures – Zone 1 & 2 ATEX
Abtech BPGA125 GRP assmebled electrical enclosures are ATEX Certified for use in Zone 1 and Zone 2 hazardous areas – the terminal enclosures commonly used as junction boxes are manufactured from GRP and available in a full range of depths and sizes.
- ATEX EEx e (Zone 1 & Zone 2)
- ATEX EEx nA (Zone 2)
The GRP carbon loaded glass reinforced polyester version of the enclosure (Abtech BPGC) helps to reduce the surface resistance of the material and consequently reduce the risk of spark from static build up – please quote Abtech BPGC125 when ordering.
GRP Assembled Enclosure
Zone 1 & Zone 2 Hazardous Areas
Abtech BPGA125 electrical enclosures are suitable for hazardous areas.
Protection Degree IP66 or IP67.
Hazardous Area Certification
- ATEX & IECEx (Zone 1 & 2; Zone 21 & 22)
Abtech BPGA125 GRP Enclosures
Junction Box Specification
|Part Reference||Enclosure Material||Width mm||Length mm||Weight g|
|Abtech BPG6A125 Enclosure||GRP (grey)||122||120||1162||Zone 1 & Zone 2|
|Abtech BPGC6A125 Enclosure||GRP (black)||122||120||1162||Zone 1 & Zone 2|
Abtech BPGA125 electrical enclosures, manufactured from GRP, are suitable for Zone 1 and Zone 2 hazardous areas according to the ATEX Directive.
|Cable Entries||Blanking Plugs||Terminals||Earth Continuity Plate||Earth Stud|
|4 x M20 (2 x Side A, 2 x Side C)||4 off (Ex‘e’ rated)||6 x WDU6 (linked in pairs)||Yes (Copper)||Yes (Brass, M6)|
-50°C to +40°C at T6
-50°C to +55°C at T5
ENCLOSURE Power Rating