Crowcon Xsafe Gas Detector

Crowcon Xsafe Gas Detectors

Crowcon Xsafe Detector – call T&D Sales for price, delivery and stock.

Fixed Gas Detectors

Single Gas & Multi-gas Detectors | Fixed Point Gas Detection & Portable Gas Safety Applications | Industrial Locations & Hazardous Area Zones

Crowcon Xsafe | Gas Detection for Non-Hazardous Areas

The Crowcon Xsafe fixed gas detector is a robust flammable gas detector suitable for use in non-hazardous areas.

Part of the Xgard family of gas detection equipment, the Xsafe gas detector has a tough alloy housing, offers a standard design and reliability without the extra cost of certified electronics.

Crowcon Xsafe gas detector is a non-certified low cost catalytic bead type detector which has 3-wire 4-20mA or mV bridge output.

Crowcon Xgard Gas Detector – Product Range

The diagram below illustrates how to determine which gas detector best suits the requirements of the end user.

Crowcon Xgard Gas Detector

Crowcon Xgard Gas Detector – Diagram


Should you require any further technical support and specification advice about the Xgard Gas Detector manufactured by Crowcon please do not hesitate to contact us.

Crowcon gas detection products provide reliable monitoring of levels of several gas hazard risks including toxic and flammable gases – should you require specific advice about selecting the correct fixed gas detection product for your application please contact us.

Size 156 x 166 x 111mm (6.1 x 6.5 x 4.3 inches)
Weight 1kg (2.2lbs)
Enclosure material Aluminium
Ingress protection IP65
Cable entries 1 x M20, 1/2 “NPT or 3/4 NPT* on right-side
Terminations 0.5 to 2.5mm2
Sensor type Catalytic bead
Operating temperature mV: -40 to +80°C (-40 to 176°F)
mA: -40 to +55°C (-40 to 131°F)
Storage -25°C to +65°C (-13°F to +149°F)
Humidity 10 to 95% RH
Repeatability Zero drift <2% FSD (Typical)
<2% FSD per Month (Typical)
Response time T90 <15s (Typical)
Operating voltage mA: 10-30V dc
mV: 2.0V dc
Power requirements mA: 50mA at 24V dc 1.2W
mV: 300mA (Typical)
Electrical output mA: 3- wire 4-20mA (current sink or source)
mV: 3- wire mV bridge
Typical signal: 12-15mV/ %LEL CH4
Approvals Not certified for use in hazardous environments
EMC compliance EN 50270
FCC Part 15
ICES- 003

*3/4 ” cable entry only available on aluminium junction boxes.

Crowcon Xsafe

Safe Area Flammable Gas Detectors

Visit hazardous area gas detectors for explosion and flameproof gas monitoring and detection instruments with certification for potentially explosive atmospheres, including Zone 1 and Zone 2 (according to ATEX and IECEx) and Class/Division categories (according to North American standards).

Did you know? Crowcon fixed gas detectors protect plant; portable gas detectors protect people.


T&D Sales Team are Certificated by Crowcon to support the specification and supply of their flammable and toxic gas detectors. Additionally, T&D are CompEx Certificated and competent in understanding hazardous area classifications and site requirements for the sale of explosion and flameproof equipment.

Data Sheets