Eltherm ELK-AG-N Heating Cable – PTFE Insulated Hazardous Area Trace Heat Pipes, Tanks, Valves, Hoppers & IBC’s up to 260°C
Eltherm ELK-AG-N Heater Cables – Trace Heating
Eltherm ELK-AG-N resistance heating cables and tapes provide process temperature maintenance and frost protection to hoppers, vessels, pipes, valves and small components up to 260° Celsius – with IECEx and ATEX Certification Eltherm ELK-AG-N trace heating cables are suitable for Zone 1 and Zone 2 hazardous areas.
RESISTANCE Heater Cable
- Nominal Supply Voltage : 230V
- Maximum Output : 25 w/m
- Maximum Operating Temperature : 260ºC
- Minimum Installation Temperature : -60° Celsius
- Heating Conductor Diameter: 3.8-4.7mm
- Minimum Heater Cable Bend Radius : 2.5mm x outer diameter
- Insulation : PTFE
- Protective Braid: Nickel-plated Copper
- Outer Jacket: PFA
- Cold Lead Length (Both Ends) : 1.2m without plug
- Moisture Proof : Yes
- Protection Class: I
- Impact Resistance: 4 Joule
- Manufactured According To : DIN VDE 0253, EN 60079-30-1
- Cable: 60079-30-1
- Pipe Collar: 60079-0-7
- Heating Cable Type : Resistance heating cable
Hazardous Area Cable Classification: II 2G Ex e IIC Gb, II 2D Ex tb IIIC Db
Hazardous Area Cable Certificates: EPS 12ATEX1466U
Hazardous Area ExCon Classification: II 2G Ex e IIC T6 to T3 Gb, II 2D Ex tb IIIC TX Db
Hazardous Area ExCon Certificates: 04ATEX1005X / 07ATEX1023X
Hazardous Area Standard ExCon: EN 60079-0:2009, EN 60079-7:2007, EN 60079-31:2009
Eltherm ELK-AG-N heating cables provide temperature maintenance and frost protection to pipework and mechanical services in all industries – typical applications include industrial and hazardous area heating of process pipework, instrument lines and storage tanks to maintain viscosity or prevent frost damage as an integral work-task of plant Winterisation.
Eltherm ELK-AG-N – Applications
- Heat tracing on tanks
- Heat tracing on vessels
- Heat tracing on filters
- Heat tracing on hoppers
- Pipes, valves and pumps
- Tank containers
- Heating hoods
- Varnishing plants
RESISTANCE HEATING CABLES
Eltherm resistance heating cables are manufactured from a high-resistance heating conductor, PTFE insulated with protective braid and fluoropolymer outer jacket. Powered at specific voltage the resistance heat generated by the conductors provides electrical trace heating to pipes and vessels. Resistance heating cables will “burn-out” if overlapped unlike self-regulating trace heating cables.
High temperature resistance heating cables insulated with glass fibre provide electrical heating up to 800° Celsius.
➡ Did you know? T&D Exports supports the global oil, gas and petrochem industries with an extensive range of Hazardous Area Electrical, Mechanical, Process & Instrumentation Equipment.
➡ Did you know? T&D also Distribute Eltherm Electrical Heated Hoses.