Increased Safety Lighting | Ex eb Lighting | Hazardous Area Technor LED EVF-P Lighting

View Sub Products

Ex eb Lighting - Increased Safety Hazardous Area Technor LED EVF-P Lighting

Ex eb Lighting – Increased Safety Hazardous Area Technor LED EVF-P Lighting

Increased Safety Lighting

EXPLOSION PROTECTION EX Eb

LED Lighting for Zone 1, Zone 21, Zone 2, Zone 22 Hazardous Area Lighting Applications

Thorne & Derrick, the Specialist Distributors of Hazardous Area Lighting can provide competitive prices and supply from stock the complete range of Technor products including electrical enclosures and junction boxes.

Technor’s LED EVF-P is an LED Ex eb lighting fixture suitable for hazardous area lighting and offers offers Ex-e IIC mode of protection and has a polycarbonate lamp housing which is three layers extrusion UV resistant.

Technor LED EVF-P lighting is classified to international hazardous area classifications with ATEX and TRCU certification, with ingress protection IP66 and an operational ambient temperature range of -20°C to +55°C.

Circular shape of the ex lighting grants the best possible “CX” factor, therefore it is less affected by wind dusts, no flat surfaces to avoid pollution and dirty bunching.

Technor LED EVF-P lighting fixtures are manufactured with a high resistance cylindrical polycarbonate lamp housing with end cups made from corrosion resistant copper free aluminium. Optionally an off-shore painting cycle can be provided to allow for use within marine environments and all LED EVF-P fixtures are supplied ready for loop in-loop out facility with 4sqmm cable.

Technor LED EVF-P – Technical Features

MaterialEnd cups in aluminium with low content of copper / Light housing in polycarbonate
IP ratingIP66/IK10 according to EN 62262:2002
Ambient temperature range-20°C to +55°C
ApprovalsTÜV CY 17 ATEX 0205846 X
GasketsO-ring made of Nitrile Rubber (NBR)
Surface treatmentEnd cups painted by green colour polyurethane painting cycle RAL6003 (other colour available upon request)
EntriesN° 2 entries M20x1.5. One plugged-off by Ex d brass nickel chrome plated plug and relevant gasket.
Hardware and screwsAISI304 Stainless steel external hardware and screws
LampsExtended long life new LED technology with CRI > 85
BallastElectronic
Rated Operation Voltage (UE)
220-240Vac (normal and emergency service)
198-278Vdc (normal service)
Frequency0/50 – 60 Hz
Power Factor>0.95
Accessories available upon requestAISI304 Pole mounting kit / AISI304 Ceiling / Wall mounting kit / AISI304 Suspension mounting kit / 3° bottom entry M20x1,5 / AISI304 protection guard / Mounting kit in stainless steel AISI316

Technor LED EVF-p Lighting – Normal Service

Technor Part NumberCodePower (W)Dimensions (mm)Weight (kg)
ABC
EVF-P 116A03031116001116764176194
EVF-P 216A0303121600112X16764176194
EVF-P 132A030311320011321374176194
EVF-P 232A0303123200112X321374176194

 

Technor LED EVF-p Lighting – 90′ Emergency Service

Technor Part NumberCodePower (W)Dimensions (mm)Weight (kg)
ABC
EVF-P 132 LE-P-90A030321320111*321374176194
EVF-P 232 LE-P-90A030322320111*2X321374176194
EVF-P 116 LE-P-90A03032116111116764176194
EVF-P 132 LE-P-90A030321321111*321374176194

* 180′ emergency version available upon request

Increased Safety Hazardous Area Technor LED EVF-P Lighting - Dimensions

Increased Safety Hazardous Area Technor LED EVF-P Lighting – Dimensions

HAZARDOUS AREA CERTIFICATION & MARKING FOR Lighting

II 2 GD

  • Ex eb mb op is IIC T4 Gb (normal service)
  • Ex eb db mb op is IIC T4 Gb (emergency service)
  • Ex tb IIIC T135°C Db IP66

under IEC Ex directive, junction boxes and enclosures are suitable for IIC group of gases/dusts only 

Approvals

TÜV CY 17 ATEX 0205846 X