Constant Wattage Heat Tracing Cable | Eltherm ELP/FEP 60 BO Heat Tracing Cable up to 200°C
Constant Wattage heat tracing Cables
Industrial Heat Tracing Cable | Eltherm ELP/FEP 60 BO
Eltherm ELP/FEP constant wattage heat tracing cables provide process temperature maintenance and frost protection to pipework, instrument lines, tanks and drums up to 200° Celsius.
These heat tracing cables manufactured by Eltherm offer flexibility in use as they can easily be cut to the required length off the roll, with the assurance of constant power output. There is no need for connecting cable and input can be unilateral. The constant wattage heat tracing cable is quick and easy to assemble, saving time and reducing operating costs.
Since the trace heater cable output of up to 60 W/m is possible for lengths laid to piping, Eltherm ELP/FEP heat tracing cables are particularly suited for piping with high output requirements such as in industrial process technology. The following are applications are below:
- Chemistry & Petrochemistry
- Building Construction
- Food Processing Industry
- Paper Industry
- Process Industries
HEAT TRACING CABLES
Eltherm ELP/FEP 60 BO Heater Cable SPECIFICATION
Eltherm ELP/FEP Heater Cable wattages per metre – 15, 30, 45 and 60 watts.
- Nominal Supply Voltage : 230v AC/DC
- Nominal Temperature : 200ºC
- Minimum Installation & Start Up Temperature : -45° Celsius
- Minimum Heater Cable Bend Radius : 25mm
- Insulation: Fluoropolymer
- Constant Wattage Heater Cable Outer Jacket: Fluoropolymer
- Protective Braid: Nickel-Plated Copper
- Bus Wire Cross Section: 2 x 1.5mm²
- Moisture Proof: Yes
- Maximum Heating Circuit Length at 50°C: 50 m
- Maximum Heating Circuit Length at 150°C: 50 m
- Bus wire: Copper
- 1st insulation: Fluoropolymer
- Heating conductor: Heating conductor alloy
- 2nd insulation: Fluoropolymer
- Protective braid: Copper, nickel-plated
- Outer jacket: Fluoropolymer
Eltherm ELP/FEP 15 BO Heating Cable Benefits
- Single end power input
- Trace heating cable can be cut from the cable drum
- Constant power output per meter
- Long life cycle
- Laying without exact measuring possible
- High chemical resistance
- UV resistance heating cables
- Moisture proof
Constant wattage heating cables such as the ELP/FEP consist of a succession of heating zones (length = contact spacing) and can be cut to length in sections of the contact distance to the required length – when cutting heater cables into lengths, the heating circuit is interrupted up to the next contact point and this non-active part can be used as a cold lead.
Heat tracing cable selection table – eltherm elp/FEP 60 BO
Contact T&D for technical guidance, heat loss calculations for pipework systems and optimum specification of the correct trace heater cable for your application.
| Type | Nominal Output (W/m) | Working Temp. Max | Dimensions approx (mm) | Contact Spacing (m) | Eltherm Order Code |
| ELP/FEP 60 BO | 60 | 150°C | 8.0 x 5.5 | 1.0 | BO33206001 |
CONSTANT WATTAGE HEATING CABLES
Constant wattage heating cables consist of a succession of heating zones (length = contact spacing) and can be cut to length in sections of the contact distance to the required length – when cutting heater cables into lengths, the heating circuit is interrupted up to the next contact point and this non-active part can be used as a cold lead.
Constant wattage heater cable when installed onto pipework for frost protection or process temperature maintenance must not intersect, contact or overlap to prevent overheating.
Self-regulating heating cables can be overlapped without risk of burn-out or overheating.
Bespoke Heated Hose Designs | 40+ Years Experience from Process Heating Specialists | CONTACT US
Datasheet – Constant Wattage Heat Trace Heating Eltherm ELP/FEP Heat Tracing Cable up to 200°C
Download
