IBC3 IBC Heating Jacket – 3150W

IBC3: IBC Heater Jacket
IBC3 IBC Heating Jacket – 3150W
The IBC3 heater jacket provides users with maximum IBC heating power from 3 separate 1050W heated circuits each with an adjustable thermostat capable of being set to temperatures between 0 – 90°C.
The IBC3 heating jacket is supplied with an insulated IBC lid as standard and is designed for users looking for a maximum power heater jacket.
Selection of the correct IBC heating jacket is vital and dependent upon many factors including required operating temperature, container contents, container construction and desired heating rates.
IBC3 heaters are suitable for use in many industries and applications including chemical, pharmaceutical food and beverage and petrochemical.
IBC3 IBC Heating Jacket Technical Specifications
Heating Jacket Dimensions | Voltage | Power Output | Thermostatic Control | Power Cable | IBC3 Heating Jacket Material | Insulation | Heating Element | Ingress Protection |
Height – 950mm Length – 4060-4310mm (adjustable) Custom size Tote Heater Blankets are also available, contact T&D for further information |
230V Only | 3150W – 3 x 1050W heating circuits | 0 to 90ºC | 5 metres, 2 x 1mm², PCV insulated sheathed, galvanised steel wire braided, per circuit |
Outer Face – single sided hydrolysis resistant, polyurethane coated polyamide substrate with fluorocarbon finish. Base fabric nylon 66 standard. Inner Face – custom polyester coated glass cloth |
Stitchbonded, needled, non-combustible glassfibre mat | Silicone rubber insulated spirally wrapped resistance wire | At least IP4x |
âž¡ For further information about container heating visit IBC Heaters and for ATEX certified products see Hazardous Area IBC Heaters.