Heating Tape | Eltherm ELW-VA 0.6 | Trace Heating Cable Factory Terminated | Corrosive Environments

Eltherm ELW-VA Heater Cable – Resistance Heating Process Temperature Maintenance

Eltherm ELW-VA Heating Tape – Resistance Heating Process Temperature Maintenance

T&D – Eltherm Heating Cables Distributor

Eltherm ELW-VA resistance heating tapes and cables provide process temperature maintenance and frost protection to sensitive components within corrosive environments such as laboratory apparatus, appliances and systems up to 260° Celsius.

Please Note: This product has been discontinued. Please Contact Thorne & Derrick for an alternative!

Heating tape – ELTHERM ELW-VA

SPECIFICATION

Nominal Supply Voltage : 230V
Maximum Output : 50 w/m
Maximum Operating Temperature : 260ºC
Minimum Installation Temperature : -30° Celsius
Dimensions (WxH): Approx 10 x 5mm
Sleeve Dimensions (W x H x L): 32 x 16 x 65mm
Minimum Heater Cable Bend Radius (Flat) : 15mm
Insulation : PTFE
Protective Braid: 1.4301 / SS 304
Cold Lead Length (Both Ends) : 1.2m, silicone cable without plug
Moisture Proof : Yes
Protection Class: I
Manufactured According To : DIN VDE 0253
Final Inspection According To: DIN VDE 0721 T 411, 2.5kV AC – 1 min
Heating Cable Type : Resistance heating tape

Heating Tape – Eltherm ELW-VA

Trace Heating tape- Eltherm ELW-va

SELECTION TABLE

Contact T&D for technical guidance, heat loss calculations for pipework systems and optimum specification of the correct trace heater tape or cable for your application.

Resistance heating tape application: frost protection and process heating.

Designation	Heated Length (m)	Nominal Output (W) Temperature Max 100ºC	Eltherm Order Code	Nominal Output (W) Temperature Max 150ºC	Eltherm Order Code	Nominal Output (W) Temperature Max 200ºC	Eltherm Order Code
ELW-VA 0.6	0.6	30	0232001	–	–	–	–

Read our Blog about the benefits of heat trace tape and please contact us to discuss your requirements for frost protection or temperature maintenance heating of pipework and mechanical services.