Trace Heating Cables | Nelson HLT215-CB | Medium Process Temperature Maintenance Cable

Nelson Heat Trace Type HLT Self-Regulating Heater Cable

Trace Heating

Nelson Heat Trace HLT self-regulating trace heating cables provide process temperature maintenance and frost protection to pipework, instrument lines, tanks and drums up to 121ºC. The Nelson Heat Trace HLT heater cable is ATEX certified for use within Zone 1 & Zone 2 hazardous area applications.

Nelson Heat Trace HLT Trace HEATing CABLE – Features & Benefits

Available for both 120 Vac and 240 Vac applications in a wide range of power densities from 3 to 20 watts per foot at 10°C/50°F
Parallel-resistance design allows cables to be Cut-to-Length in the field with no danger of creating cold or dead zones
Metal braid with a fluoropolymer overjacket resists moisture, corrosion and solvents
HLT cables are UL Listed, CSA Certified and FM Approved
Freeze protection for metallic pipes that are periodically steam cleaned at temperatures up to 191°C/375°F
Maintaining the temperature and viscosity of piped liquids in applications that require a temperature of 121°C/250°F or lower
Piping systems for hydrocarbons and chemical products
Classified hazardous locations

Nelson Heat Trace HLT Trace Heating CABLE – SPECIFICATION

Nelson Heat Trace Cable Part Number	Supply Voltage	Maximum Segment Length	Description	Maximum Maintenance Temperature	Maximum Intermittent Exposure Temperature	Watts / M (Watts / ft)
HLT215-CB	240 V	80m (270ft)	Tinned Copper Braid	120ºC / 250ºF	215ºC / 420ºF	49 (15)

Trace Heating Cables | Nelson HLT Cross Section

Certifications and Compliances

UL Listed: E33597, E53501, E49805
CSA Standard: C22.2 No. 130-16
CSA Certified: LR42103, LR42104
FM Approved: JI 5D0A4.AX, JI 3B3A6.A6, JI 3B6A4.AX
Other Standards: IEEE 515-2011, IEEE 515.1-2012

➡ Nelson Heat Trace Heat Heating Cables provide frost protection to water pipework, hot water temperature maintenance, process temperature maintenance in industrial applications.