VEGA VEGAPULS 64 Radar Level Sensor

VEGA Level Sensors
Level Sensor VEGA VEGAPULS 64
VEGA VEGAPULS 64 radar level sensor provides continuous level measurement of aggressive liquids under difficult process conditions,  including those within storage tanks, process vessels, dosing vessels and reactors  providing exact measuring results independent of pressure, temperature, gas or steam.

Vega Vegapuls 64 Sensor Installed With Isolation Valve
VEGA VEGAPULS 64 Radar LEVEL SENSOR
PRODUCT SPECIFICATIONS
Measuring Range – Distance | Process Temperature | Level Sensor Accuracy | Level Sensor Protection Rating | Ambient Temperature | Hazardous Area ATEX
Level Sensor |
30 m | -40 – 200°C | ±2mm | IP66/IP68 (0.2 bar) IP66/IP67 + IP66/IP68 (1 bar) |
-40 to 80 °C |  Yes, VEGA VEGAPULS 64 is suitable for hazardous areas
(see ATEX download). |
VEGAPULS 64 LEVEL SENSOR HAZARDOUS AREA CERTIFICATIONS
VEGAPULS 64 radar level sensor is available with hazardous area certifications to meet ATEX & IECEx directives for Zone 1 and Zone 2 installations.
ATEX & IECEX APPROVALS
ATEX II 1G, 1/2G, 2G Ex ia IIC T6
ATEX II 1G, 1/2G, 2G Ex ia IIC T6 + WHG
ATEX II 1G, 1/2G, 2G Ex ia IIC T6 + Ship approval
IEC Ex ia IIC T6
ATEX II 1/2G, 2G Ex d ia IIC T5/T6
IEC Ex d ia IIC T6
IEC Ex ia IIC Ga, Ga/Gb, Gb + Ex t IIIC T* Da, Da/Db, Db IEC Ex d IIC Ga/Gb, Gb + Ex t IIIC T* Da, Da/Db, Db
IEC Ex t IIIC T* Da, Da/Db, Db
ATEX I M2 Ex ia I Mb
VEGA level sensors are suitable for use in hazardous areas and their instruments also have various ship approvals such as e.g. DNV, GL, LRS or ABS.
VEGA LEVEL SENSOR – VEGAPuls 64 FEATURES
Function
Extremely short microwave pulses are emitted by the antenna system in the direction of the measured product, reflected by the product surface and received back again by the antenna system.
The time from emission to reception of the signals is proportional to the level in the vessel. A special time stretching procedure allows reliable and precise measurement of the extremely short signal running times.
MATERIALs
Wetted Parts:Â 316L, PP, PTFE or PEEK.
Process Seal: FKM, FFKM, EPDM or PTFE
Housing Versions
Single or double chamber version in plastic, stainless steel or aluminium, IP68 (1 bar).
Electronics Versions
- 4-20 mA/HART
APPROVALS
- Shipbuilding
- ATEX
- IEC
- FM
- CSA
VEGA Level Measurement Instruments & Sensors include capacitive, hydrostatic, guided wave radar and ultrasonic sensors for the measurement of bulk liquids, solids and powders in safe, industrial and hazardous area industries.
Thorne & Derrick provide Process Measurement and Instrumentation systems for level measurement, flow measurement, temperature measurement and pressure measurement.
T&D provide expert technical advice, specification guidance and competitive quotations for VEGA sensors from stock. Contact us for support on industrial and hazardous area flow measurement.

VEGA Level Sensors : Measurement of level, point level, pressure, flow and density.
âž¡ Did you know? T&D are Main Distributors for Micronics Flow Meters.