ATEX Floodlights | Zone 1 Floodlight Hazardous Area Lighting
ATEX Floodlight | Zone 1 Floodlight Hazardous Area Lighting
ATEX Floodlights
Zone 1 Floodlight – Hazardous Area Lighting
ATEX Floodlight Classification – Ex de II 2GD IIB T2 – T3 Protection IP 66
➡ Please Note: This range has been superseded by Petrel LED Area Light
Petrel 8 Series are high output Zone 1 floodlights suitable for Zone 1 hazardous area lighting applications with a range of lamp wattages available from 150W to 500W.
Heavy duty Zone 1 hazardous area ATEX floodlights are manufactured from marine grade aluminium and incorporating an adjustable beam feature and are certified for use with SON, MBF and tungsten lamps.
Lamp access is via a screwed cover for rapid lamp change and the floodlight may be mounted using adjustable pivot bracket or pole mounting points. Additionally, the Petrel 8 Series Zone 1 floodlights are fitted with symmetrical reflector as standard.
➡ See Zone 2 Hazardous Area Lighting for fluorescent, LED, floodlight and bulkhead type light fittings for potentially explosive atmospheres with ATEX certification – Zone 2 fluorescent also available.
View our complete range of ATEX Floodlights manufactured by Raytec and certified according to the ATEX Directive to provide safe and reliable hazardous area lighting in potentially explosive atmospheres in both onshore and offshore locations Zone 1 & 2 Flammable Gas and Zone 21 & 22 (Combustible Dust).
ZONE 1 Floodlight
ATEX – Zone 1 Floodlight
Hazardous area & atex approved
- Certification and Hazardous Area Approval Certification Code: Ex de II 2 GD IIB T2 – T3
- Certification Number: SIRA 01 ATEX 1035. IECEx SIR 09.0030
- Certification Standard: EN 60079, EN 61241, IEC 60079, IEC 61241
- Protection: IP 66
ATEX Floodlights
Benefits & Options
- Pole mounting Zone 1 floodlight
- Fully angular adjustable stirrup mounting
- 8/150wSON-T/240/50 (150W SON version), 8/250wSON-T/240/50 (250W SON version)
Hazardous Area Zone 1 Lighting Stockists & Suppliers Shipping Worldwide
- 8/400wSON-T/240/50 (400W SON version)
- 8/250wMBI-T/240/50 (250W metal halide version), 8/400wMBI-T/240/50 (400W metal halide version)
- 8/500w/TH/240/50 (500W tungsten halogen version)
- 8/250w/HPMV/240/50 (250W mercury vapour version), 8/400wHPMV/240/50 (400W mercury vapour version)
- Narrow/Wide beam adjustment to focus Zone 1 floodlight output as required
- Low installation costs with integral ‘e’ terminal chamber (inexpensive glanding)
- Single cast floodlight body (no junction box required), more resistant to corrosion
- 230v 50Hz Check for alternative voltages and frequency.
- -20°C to +55°C standard supply but subject to lamp, voltage and ambient temperature combinations .
- Tubular: SON, MBI, HPMV, Tungsten. Symmetrical reflector fitted to all versions.(Lamps not provided)
Zone 1 Floodlight ATEX – Petrel 8 Series
ZONE 1 FLoodlight ATEX – PETREL 8 SERIES
Technical Data
| Supply Voltage | 230V 50Hz , Check for alternative voltages and frequency |
| Operating Temperature | -20ºC to +55ºC standard supply subject to lamp, voltage and ambient temperature requirements |
| Control Gear | Integral within the luminaire and optional power factor correction |
| Lamp Options | Tubular: SON, MBI, HPMV, Tungsten. Symmetrical reflector fitted to all versions. (Lamps not provided) |
| Cable Entries | 2 x M20 – ISO (1 plugged as standard). Other threads available. |
| Terminals | 2 wire and earth. Cable size 6mm² max with looping facility |
| Mounting Facility | Rear pole mounting directly to body or for adjustable angle version order with “U” shaped stirrup and graduated angle bracket |
| Access | Terminals accessed via Ex e terminal cover with 4 stainless steel fixings. Lamp change via threaded lamp cover for reduced maintenance time |
| Material | Corrosion resistant marine grade Aluminium body and covers and toughened Borosilicate glass |
| Finish | 2 pack epoxy paint on primed surface. Standard floodlight colour – Aqua. Additional costs for non standard colours |
| Weight | SON, MBI, HPMV – 33kgs Tungsten – 29kgs |
| Floodlight Features | Adjustable beam width Symmetrical reflector fitted to all versions Heavy Duty construction Directionally adjustable with stirrup mounting bracket. |
Zone 1 Floodlight ATEX – Ex de – Petrel 8 Series – Dimensions
Zone 1
T&D distribute an extensive range of Zone 1 Hazardous Area Equipment including plugs/sockets, junction boxes/enclosures, isolators and control panels with ATEX certification for both Zone 1 and Zone 2 potentially explosive atmospheres.
Zone 1 Floodlight ATEX – Lamp Access Cover
Zone 1 Floodlight ATEX – Beam Adjustment
Zone 1 Floodlight ATEX – Angular Adjustment Mounting Plate
Zone 1: Petrel Bulkhead, Fluorescent Fitting, Well Glass, Floodlights & LED Luminaires – all ATEX Certified for hazardous area Zone 1 lighting.
Electrical, Mechanical, Process & Instrumentation – Your Explosive Atmosphere Experts
T&D supply Hazardous Area Plugs for safe electrical power distribution in Zone 1 / Zone 2 (10A to 680A) – Marechal DXN socket plugs and inlets are ATEX certified.
Zone 1 Floodlight ATEX – Ex de – Petrel 8 Series – Data Sheet
Download
