Patol 5610 Heat Sensor – Infrared Transit Heat Sensor (Patol 5000)

Patol 5610 infrared conveyor heat detector provides early warning heat sensor and can trigger at temperatures as low as 100°C and is specifically designed for hazardous areas and is IECEx / ATEX approved for Zones 1, 2 & 21, 22.

The Patol 5620 incorporates a series of user programmable SIL switches with option selections including detector sensitivity settings, auto/manual reset sequence selection and single / coincidence voting from the two individual internal detectors for the alarm trip and shutdown outputs.

The unit can be used in two principle operating modes. Either relay mode, with its own 24 Vdc power supply or in low power mode (as shown below), see datasheet for further details

Typical applications for the Patol 5610 heat detector include:

• Conveyors
• Biomass
• Drying Lines
• Waste Recycling Conveyors
• Food Processing
• Production Lines

Patol 5610 Heat Sensor – Product Specifications

Detectors	Spectral Filter	Sensitivity	Transit Speed	Sensor Head	Temperature	IP Rating
2off—Employing reflective cone optical focus system	5 to 14µm wide band	10 to 40µm	0.5 6m/s	3kg	-20°C to +60°C	IP66

Patol 5610 Heat sensor – key product features

• Detection of hazards at temperatures below flame point including both embers and buried hot spots
• IECEx & ATEX approved
• Twin high integrity detection circuit channels for maximum reliability
• Two wire operation – Can be powered by direct connection to standard fire trigger circuits or addressable loop interface
• Single / Coincidence voting output
• Timed auto reset / coincidence analyser circuit
• Tuned response — solar blind
• Volt free relay contact output operation selectable as standard
• Fault Monitored, with Test & Reset push Buttons
• Field Programmable
• Marking: II 2 G d IIC T5 Gb II2 D Ex tb IIIC T95°C Db

Read Patol Guest Blog: Conveyor Fire Detection – Prevents Fires & Downtime With Patol Detection Cables.

There are thousands of conveyor systems all around the globe, all needing a specialist fire detection system capable of stopping any product at the combustion stage from getting further into any plant, holding hoppers, blending/crushing areas or causing damage to the belt itself.

➡ Did you know? Thorne & Derrick are heating specialists with over 20 years experience supplying heaters and heating products for hazardous areas with ATEX and IECEx certifications.

Data Sheets

• Patol 5610 Heat Sensor – Infrared Transit Heat Sensor (Patol 5000) – Data Sheet
  Download