Wolf LinkEx Portable Fluorescent Leadlamp – Zone 1, 2, 21 & 22 Hazardous Area Leadlamp

Wolf

Hazardous Area LED Floodlights

Wolf LL-500

Floodlights for Zone 1,2 Zone 21, 22 Hazardous Area Lighting

Wolf LinkEx Portable Fluorescent Leadlamps are ATEX certified temporary luminaires for safe use in hazardous area Zone 1 & 2 (Gas, Vapour & Mist Explosive Atmospheres) and Zone 21 & 22 (Dust Explosive Atmospheres) – T&D are Approved Distributors for the Wolf Lighting including handlamps, torches, headtorches and floodlights.

The Wolf LinkEx portable fluorescent leadlamps have a rugged and compact design and are available with twin side by side forward facing, or quad back to back energy efficient fluorescent lamp combinations in a wide range of voltages (24V – 254V).

The LinkEx leadlamps can be supplied with direct cable entries or fitted with ATEX plugs/sockets to allow the units to be instantly linked in series (plug and play), allowing for quick and easy installation over a large area and the lights can be connected together in the explosive atmosphere while energised.

ATEX Leadlamps For Hazardous Areas

Wolf LinkEx leadlamps provides reliable and versatile hazardous area lighting according to both ATEX Directive and IECEx standards – the leadlamps utilise fluorescent technology as a light source and are used for safe lighting in hazardous area Zones 1 and Zones 2 (potentially explosive gas) and Zones 21 and Zones 22 dust atmospheres (IIA, IIB & IIC Groups) with T3 temperature classification.

ATEX & IECEx Certified For Explosive Atmospheres

An overview of the Wolf LinkEx leadlamps range to provide temporary lighting in explosive atmospheres:

Wolf LL-500 Leadlamp Zone 1
ATEX Certification: II 2 GD Ex emb IIC T3/T4 Gb, Ex tD A21 IP66/67/68 T100ºCII 2 GD Ex embd IIC T3/T4 Ex tD A21 IP66 T100ºC (Linkable)
Hazardous Area Zone 1 & 2 Gas Groups IIA, IIB & IIC
Temperature Classification (Gas) T3 | See more information about T Class Ratings
Maximum Surface Temperature (Dust) 100ºC
More Technical Information Hazardous Area Zones

Wolf Linkex Portable FLuorescent Leadlamps

ATEX and IECEx Certified leadlamp for Zone 1 & 2 explosive gas and dust atmospheres
Fitted with plugs and sockets to link in series
Twin or quad lamp configuration
Compact & robust design
Wide voltage range 24V – 254V
Uses standard compact fluorescent leadlamps for ease of maintenance
Control ballast incorporates ‘End of Life’ protection circuit
Integrated Unistrut compatible mounting points
Emergency version available
Industrial version available

ATEX Certified Leadlamps

Zones 1, 2, 21 & 22 Hazardous Areas

Zone 1 & Zone 2 Gas
ATEX Temporary Floodlights
Zone 21 & Zone 22 Dust
See below table for ATEX Certification details including T-Rating, Gas Groups and Zone locations

The Wolf LinkEx range are leadlamp manufactured by Wolf Safety Lamp to provide lighting in Zone 1, Zone 2, Zone 21 or Zone 22 hazardous areas – the fluorescent leadlamps are for use in potentially explosive atmospheres according to the ATEX Directive.

Wolf LinkEx Portable Fluorescent Leadlamp

WOLF LinkEx Portable Fluorescent Leadlamp Technical Information

The following table explains the technical specification differences for the Wolf LinkEx range of leadlamp – should you require support or advice on selecting the correct hazardous area leadlamp please do not hesitate to contact us.

Wolf Part Reference		Wolf LL-500
Floodlite Description		LinkEx Portable Fluorescent Leadlamp
Hazardous Area Code (ATEX & IECEx)		II 2 GD Ex emb IIC T3/T4 Gb, Ex tD A21 IP66/67/68 T100ºCII 2 GD Ex embd IIC T3/T4 Ex tD A21 IP66 T100ºC (Linkable)
Type of Protection		‘e’ Increased Safety, ‘m’ encapsulation, ‘d’ flameproof
Area of Hazardous Classification (Gas)		Zones 1 & 2, Gas Group IIA, IIB, IIC
Temperature Classification (Gas)		T3
Area of Hazardous Classification (Dust)		Zones 21 and 22
Maximum Surface Temperature (Dust)		T100ºC
Ambient Temperature		2 x CFL Unit: -20ºC to +44ºC4 x CFL Unit: -20ºC to +35ºC
ATEX Certificate		SIRA08ATEX3098 / IECExSIR10.0121
Enclosure		Polymer
Lens		Polycarbonate with Anti-Static Coating
Beam Type		Wide Angle White Area Light High Output, High Efficiency, Low Glare
Light Source	Type	Standard 2G11 CFL Compact Fluorescent
	Power	2 x 18 Watts	2 x 36 Watts			4 x 36 Watts
		Standard	Standard	360º	Emergency	Standard
	Typical Consumption	32W	62W		70W	124W
	Output	2400lm	5800lm			11600lm
Voltage	220-254V AC/DC	Yes	Yes	–	Yes	–
	110-130V AC/DC	Yes	Yes	–	Yes	Yes
	42-52V AC/DC	–	Yes	–	–	–
	24-28V AC/DC	–	Yes	Yes	–	–
Ingress Protection		IP66/67/68 (3m for 30 minutes)
Weight		2.7kg	4.1kg	4.6kg	4.3kg	5.5kg
Length		0.43m	0.58m	0.84m		0.82m