Craig & Derricott Isolators | ATEX & IECEx Hazardous Area Zones 1 & Zone 2 Isolators

Craig & Derricott | Isolators | Explosion Proof & Hazardous Area ATEX IECEx

Craig & Derricott Isolators

IECEx & ATEX Certified Isolators for Explosive Atmospheres

Craig & Derricott isolators and control stations are certified by ATEX & IECEx for Zone 1 (21) and Zone 2 (22) hazardous areas – the range of i-switch isolators are suitable for Ex d (flameproof) and Ex e (increased safety) applications and the i-push control stations are certified for Zone 22 potentially explosive dust atmospheres.

Craig & Derricott has been at the cutting edge of Explosion Proof Switchgear design and manufacture for more than 70 years focussing solely on the design specifications of the installer. This led to the development of the i-switch and i-push product range suitable for hazardous areas offering simple installation, enhanced safety and effectiveness for LV electrical isolation.

Complete range of fire rated isolators are available to provide electrical isolation and protection to building services in the event of a fire.

Ex d Hazardous Area Zone 1 & Zone 2 Flameproof Isolators ATEX Certified (IECEx) – Explosive Gas Atmospheres
Ex e Hazardous Area Zone 1 & Zone 2 Increased Safety Isolators ATEX Certified (IECEx) – Explosive Gas Atmospheres
ATEX Category 3D non-conductive dust Zone 22 Control Stations – Explosive Dust Atmospheres
Bespoke Control Stations for hazardous areas

Fire Rated Isolators | Resistant to Fire up to 400 Degrees Celsius 120 Minutes – isolators (switch disconnectors) are installed throughout industrial, building services and HVAC (ventilation fans) projects providing excellent switching ability even under fire conditions.

ATEX Isolators

Explosion Proof Isolators | Gas & Dust Atmospheres

ATEX Certified Zone 1 & Zone 2 Isolators – a range of 25A – 180A explosion proof isolators supplied in Exe enclosures manufactured from IP65 glass reinforced polyester to ensure the product will withstand being installed in hazardous area locations and the harshest of industrial environments. Safe Isolation – the operating handles can be padlocked in the ‘Off’ position and all lids are mechanically interlocked with the isolating switch and are removable in the ‘On’ position only.

ATEX

The i-switch range of isolators for safe installation protect and maintain low voltage power distribution in hazardous area locations – Ex d and Ex e protection are available with current ratings 16A-250A housed in either cast iron or cast aluminium enclosures.

The i-push range of hazardous area control stations are ATEX certified (Group II) for safe use in Zone 22 potentially explosive atmospheres. Control stations can incorporate single or double push buttons, emergency push button and emergency stop start options – hazardous area “stop starts” are manufactured from die-cast aluminium with emergency stop and start contacts configured to client specification.

Craig & Derricott is dedicated to a continued program of investment and growth with recent significant recruitment across the business in Engineering, Sales and Manufacturing.

Explosion Proof Isolators

Zone 1 & zone 2

Isolator Rating (Amps)	Explosion Proof	Format	Handle Colour	Craig & Derricott Cat No	Optional Brass Earthing Plate	Enclosure Size
25A	Exd	3P+Aux	Red/Yellow	EXZ1SDR02530	EXEP0253	A
25A	Exd	4P+Aux	Red/Yellow	EXZ1SDR02540	EXEP0254	A
40A	Exd	3P+Aux	Red/Yellow	EXZ1SDR04030	EXEP0403	B
40A	Exd	4P+Aux	Red/Yellow	EXZ1SDR04040	EXEP0404	B
80A	Exd	3P+Aux	Red/Yellow	EXZ1SDR08030	EXEP0803	C
80A	Exd	4P+Aux	Red/Yellow	EXZ1SDR08040	EXEP0804	C
180A	Exd	3P+Aux	Red/Yellow	EXZ1SDR18030	EXEP1803	D
180A	Exd	4P+Aux	Red/Yellow	EXZ1SDR18040	EXEP1804	D

Pictured: Zone 1 & Zone 2 Isolators with 25A-180A current rating, GRP enclosures for explosion proof isolation of LV power in explosive / flammable gas hazardous areas. Explosion Proof ATEX & IECEx Certified.

Zone 21 & Zone 22

Isolator Rating (Amps)	Format	Craig & Derricott Cat No	Enclosure Size	Enclosure Material	IP Rating	Supplied Bottom Entries
20A	6P+2/EB	SDDG206EBZ22	A22	Die-Cast Aluminium	IP65	1 x M20 top + 2x M20 bottom
25A	3P+2/EB	SDDG253EBZ22	A22	Die-Cast Aluminium	IP65	1 x M20 top + 2x M20 bottom
32A	3P+2/EB	SDDG323EBZ22	A22	Die-Cast Aluminium	IP65	1 x M20 top + 2x M20 bottom
32A	6P+2/EB	SDDG326EBZ22	B22	Die-Cast Aluminium	IP65	2 x M25 + 1 x M20 bottom
40A	3P+2/EB	SDDG403EBZ22	B22	Die-Cast Aluminium	IP65	2 x M25 + 1 x M20 bottom
40A	6P+2/EB	SDDG406EBZ22	B22	Die-Cast Aluminium	IP65	2 x M25 + 1 x M20 bottom
63A	3P+2/EB	SDDG633EBZ22	B22	Die-Cast Aluminium	IP65	2 x M25 + 1 x M20 bottom

Pictured: Zone 21 & Zone 22 Isolators with 20A-63A current rating, aluminium enclosures for explosion proof electrical isolation in explosive dust hazardous areas. Explosion Proof ATEX & IECEx Certified.

Ex d & EX E Hazardous Area Zone 1 & Zone 2 ATEX Certified

Hazardous area Ex d & Ex e isolators provide safe electrical isolation for low voltage power in Zone 1 & Zone 2 (gases) and Zone 21 & Zone 22 (dusts) environments. Craig & Derricott has been associated with the design and manufacture of Ex products for more than 30 years.

ATEX certified isolators with Ex d and Ex e protection are available with current ratings 16A-250A housed in either cast iron or cast aluminium enclosures. Flameproof Ex d isolators can be customised to accommodate specific cable entry requirements.

Hazardous Area Isolators Zone 1 Zone 2

Craig & Derricott ATEX Group II (Zone 22) equipment can be used to help you comply with Health & Safety regulations and are used in applications such as:

Grain Mills
Powder Coating Plant
Textiles
Chemicals
Cargo Handling
Woodworking
Pharmaceuticals
Waste Processing

About Craig & Derricott

Craig & Derricott was established in 1944 manufacturing control gear products with a reputation for engineering expertise, customer service and well proven products. Dedicated to increasing and improving product offering new additions and enhancements are introduced frequently. Craig & Derricott has been designing and manufacturing Hazardous Area equipment for more than 20 years.

Today’s products have been designed to meet International specifications for Zones 1 & Zone 2 (Explosive Gas Atmospheres) and with the increase in awareness for flammable dust environments Craig & Derricott have specific designs for Zone 22 (Explosive Dust Atmospheres).

Integrity | Knowledge | Reliability | Electrical HVAC Process Instrumentation Equipment

EXPERTS IN EQUIPMENT FOR EXPLOSIVE ATMOSPHERES

Thorne & Derrick are leaders in the development and distribution of ATEX & IECEx Product Innovations that deliver significant improvements to clients plant, people and operational safety in the explosive atmosphere industries.

Your proactive problem solvers experienced in succession planning for the replacement of obsolete, non-conformant and legacy equipment in hazardous areas.

Your first-choice provider of innovative and competitive solutions to ensure ATEX & IECEx Compliance for Hazardous Area Electrical, HVAC & Process Instrumentation Equipment to UK and international projects.