Hazardous Area Emergency Stop / Start Control Station Ex ATEX – SSTH/GS/P/F1/MG/COZ

Hazardous Area Stop Control Station Ex ATEX - SSTH/GS/P/F1/MG/COZ

Hazardous Area Emergency Stop / Start Control Station Ex ATEX – SSTH/GS/P/F1/MG/COZ

Hazardous Area Emergency Stop / Start Control Station – ATEX Certified

Craig & Derricott SSTH/GS/P/F1/MG/COZ

ATEX Zone 22 Control Stations

ATEX Zone 22 ‘Emergency Stop/Start’ control station, with red mushroom pull-to-reset and green momentary actuators.
‘Start’ legend.
U29 die-cast flap cover printed ‘Emergency Stop’. Used to prevent unauthorised resetting of stayput actuators. The flap is depressed to actuate the pushbutton with one or more padlocks in position. This ensures resetting cannot take place untill all of the padlocks are removed.
Die-cast aluminium enclosure with 2 x M20 entries.
External earth
Sealing to IP65
1 C/O contact block per actuator
IEC/EN 60947-5-1
Electrical ratings:-
Control Station Utilisation Category – AC15
Rated insulation voltage(U_i) – 660V
Rated operational voltage(U_e) – 250V/660V
Rated operational current(I_e) – 4A/2A
Continuous thermal current(I_th) – 10A

ATEX Certification Code

ATEX Ex II 3D
ATEX EX tD A22 IP65 T85^oC

Hazardous area emergency stop / start type control station complies in part or full with: BS EN 50014, BS EN 50281-1-1, BS EN 60529, BS EN 60947-3, BS EN 60204-1

Craig & Derricott SSTH/GS/P/F1/MG/COZ – Dimensions

STOP / START CONTROL STATIONS

Hazardous area local control stations and push buttons including emergency stop, start and stop/start configurations are ATEX approved for Zone 1, Zone 2 and Zone 22 – specified to provide machinery control where explosion proof control stations are required for hazardous area industries including oil, gas, petrochem, food and offshore.

Flameproof Hazardous Area Heating

T&D Hazardous Area & Explosive Atmospheres Specialists

T&D distribute a complete range of ATEX Ex d hazardous area isolators for use in Cat II, Zone 1, Zone 2, Zone 21 and Zone 22 hazardous area locations – isolators are housed in cast iron (16A-63A) or cast aluminium (80A-250A).