Wolf LinkEx Portable Fluorescent Leadlamp Emergency – Zone 1, 2, 21 & 22 Hazardous Area Leadlamp
Wolf LinkEx Portable Fluorescent Leadlamp Emergency – Zone 1, 2, 21 & 22 Hazardous Area Leadlamp
Wolf
Hazardous Area LED Floodlights
Wolf LL-540/E
Floodlights for Zone 1,2 Zone 21, 22 Hazardous Area Lighting
Wolf LinkEx Portable Fluorescent Leadlamps Emergency are ATEX certified temporary luminaires for safe use in hazardous area Zone 1 & 2 (Gas, Vapour & Mist Explosive Atmospheres) and Zone 21 & 22 (Dust Explosive Atmospheres) – T&D are Approved Distributors for the Wolf Lighting including handlamps, torches, headtorches and floodlights.
The Wolf LinkEx portable fluorescent leadlamps emergency have a built-in back-up battery power supply and a rugged and compact design, available with twin lamp combinations in a wide range of voltages (110V – 130V).
The LinkEx leadlamps can be supplied with direct cable entries or fitted with ATEX plugs/sockets to allow the units to be instantly linked in series (plug and play), allowing for quick and easy installation over a large area and the lights can be connected together in the explosive atmosphere while energised.
ATEX Leadlamps For Hazardous Areas
Wolf LinkEx leadlamps provides reliable and versatile hazardous area lighting according to both ATEX Directive and IECEx standards – the leadlamps utilise fluorescent technology as a light source and are used for safe lighting in hazardous area Zones 1 and Zones 2 (potentially explosive gas) and Zones 21 and Zones 22 dust atmospheres (IIA, IIB & IIC Groups) with T3 temperature classification.
ATEX & IECEx Certified For Explosive Atmospheres
An overview of the Wolf LinkEx leadlamps range to provide temporary lighting in explosive atmospheres:
- Wolf LL-540/E Leadlamp Zone 1
- ATEX Certification: II 2 GD Ex embd IIC T3 Ex tD A21 IP66 T102°C
- Hazardous Area Zone 1 & 2 Gas Groups IIA, IIB & IIC
- Temperature Classification (Gas) T3 | See more information about T Class Ratings
- Maximum Surface Temperature (Dust) 102ºC
- More Technical Information Hazardous Area Zones
Wolf Linkex Portable FLuorescent Leadlamps Emergency
- ATEX and IECEx Certified leadlamp for Zone 1 & 2 explosive gas and dust atmospheres
- Emergency back-up light
- Up to 3 hours battery duration after full charge
- Fitted with plugs and sockets to link in series
- Twin lamp configuration
- Compact & robust design
- Wide voltage range 110V – 130V
- Uses standard compact fluorescent leadlamps for ease of maintenance
- Control ballast incorporates ‘End of Life’ protection circuit
- Integrated Unistrut compatible mounting points
- Non-Emergency version available
- Industrial version available
ATEX Certified Leadlamps
Zones 1, 2, 21 & 22 Hazardous Areas
- Zone 1 & Zone 2 Gas
ATEX Temporary Floodlights
- Zone 21 & Zone 22 Dust
- See below table for ATEX Certification details including T-Rating, Gas Groups and Zone locations
The Wolf LinkEx range are leadlamp manufactured by Wolf Safety Lamp to provide lighting in Zone 1, Zone 2, Zone 21 or Zone 22 hazardous areas – the fluorescent leadlamps are for use in potentially explosive atmospheres according to the ATEX Directive.
Wolf LinkEx Portable Fluorescent Leadlamp Emergency
WOLF LinkEx Portable Fluorescent Leadlamp Emergency Technical Information
The following table explains the technical specification differences for the Wolf LinkEx range of leadlamp – should you require support or advice on selecting the correct hazardous area leadlamp please do not hesitate to contact us.
Wolf Part Reference | Wolf LL-540 | |
Floodlite Description | ATEX LinkEx Portable Fluorescent Leadlamp – Emergency Linkable | |
Hazardous Area Code (ATEX & IECEx) | II 2 GD Ex embd IIC T3 Ex tD A21 IP66 T102°C | |
Type of Protection | ‘e’ Increased Safety, ‘m’ encapsulation, ‘d’ flameproof | |
Area of Hazardous Classification (Gas) | Zones 1 & 2, Gas Group IIA, IIB, IIC | |
Temperature Classification (Gas) | T3 | |
Area of Hazardous Classification (Dust) | Zones 21 and 22 | |
Maximum Surface Temperature (Dust) | T102ºC | |
Ambient Temperature | -15°C to +53°C | |
ATEX Certificate | SIRA08ATEX3098 / IECExSIR10.0121 | |
Enclosure | Polymer | |
Lens | Polycarbonate with Anti-Static Coating | |
Beam Type | Wide Angle White Area Light High Output, High Efficiency, Low Glare | |
Light Source | Type | Standard 2G11 CFL Compact Fluorescent |
Life | Up to 10,000 Hours | |
Power | 2 x 36 Watts | |
Typical Consumption | 62W | |
Output | 5800lm | |
Voltage | 110-130V AC | |
Ingress Protection | IP66 | |
Weight | 4.1kg | |
Length | 0.58m |
WOLF Linkex Portable Fluorescent Leadlamp Emergency
Light Output & Product Dimensions
Wolf LinkEx Portable Fluorescent Leadlamp Emergency – Light Output
2 x 36W 180°
Peak luminous iIntensity at 2.5m 190 lux, at 5m 50 lux
Wolf LinkEx Portable Fluorescent Leadlamp Emergency – Product Dimensions
Wolf LinkEx Portable Fluorescent Leadlamp Emergency – Ideal for hazardous area applications where temporary lighting is required for extended periods of time.
Wolf Safety Lamp | Handlamps | Torches | Headtorches | Tank Lights | ATEX Hazardous Areas
Electrical, Mechanical, Process & Instrumentation – Your Explosive Atmosphere Experts