Wolf WF-300XL LinkEx LED Floodlite ATEX – Zone 1, 2, 21 & 22 Hazardous Area Floodlight

Wolf

Hazardous Area LED Floodlights

Wolf WF-300XL

Floodlights for Zone 1,2 Zone 21, 22 Hazardous Area Lighting

Wolf LinkEx LED Floodlites are ATEX certified temporary floodlights for safe use in hazardous area Zone 1 & 2 (Gas, Vapour & Mist Explosive Atmospheres) and Zone 21 & 22 (Dust Explosive Atmospheres) – T&D are Approved Distributors for the Wolf Lighting including handlamps, torches, headtorches and floodlights.

WF-300XL floodlites are high powered, robust, lightweight and portable, producing 6,378 lumens with a low power consumption of only 55W (LV) or 62W (HV).

Two LED panels with 18 lights provide a 33º beam angle with more than 100,000 hours of life assured by efficient heat dissipation through built-in fins and electronic thermal control.

Wolf WF-300XL LinkEx LED Floodlites are supplied with 10 metres of SY cable and fitted with an ATEX plug and runs with voltages of 90 to 264V AC/DC or 18 to 50V AC/DC.

For mains voltages it can also be fitted with an ATEX socket to setup a string of lights from a single power source.

The LinkEx LED Floodlite is constructed with a robust marine grade aluminium enclosure with corrosion resisting coating is ideal for harsh environments.

The lens is a toughened, scratch, impact and chemical resistant glass, which can be protected using a disposable anti-static lens film and is sealed dust tight and protected from water immersion with a certified IP66/67 enclosure.

Supplied with a stainless steel (316 grade) bridle for pivot angle adjustment and bolted to a stainless steel stand for protection. The floodlite is fitted to a stainless steel bridle and stand which can be pivoted and can easily be detached and bolted to magnet fixings or a tripod stand.

ATEX Floodlight For Hazardous Areas

Wolf WF-300XL floodlight provides reliable and versatile hazardous area lighting according to both ATEX Directive and IECEx standards – the floodlight utilise LED technology as a light source and are used for safe lighting in hazardous area Zones 1 and Zones 2 (potentially explosive gas) and Zones 21 and Zones 22 dust atmospheres (IIIA, IIIB & IIIC Groups) with T4 temperature classification.

ATEX & IECEx Certified For Explosive Atmospheres

An overview of the Wolf ATEX WF-300XL floodlight range to provide temporary lighting in explosive atmospheres:

Wolf WF-300XL Spot Beam Floodlight Zone 1
ATEX Certification: II 2 G D Ex eb mb op is IIC T4 Gb Ex tb op is IIIC T118°C Db T = -40°C to +55°C
Hazardous Area Zone 1 & 2 Gas Groups IIA, IIB & IIC
Temperature Classification (Gas) T4 | See more information about T Class Ratings
Maximum Surface Temperature (Dust) T118ºC
More Technical Information Hazardous Area Zones

Wolf WF-300XL Linkex LED Floodlite ATEX

ATEX Temporary Floodlights

ATEX Directive compliant floodlite and IECEx Scheme certified including OPIS optical intrinsic safety
For use in Zones 1 gas and 21 dust atmospheres
High reliability LED’s – designed and tested to give 100,000+ hours life
Thermal management – LED life assured by efficient heat dissipation through built in fins and electronic control
Dual Independent LED System – LEs powered by independent drivers giving failsafe product reliability
Safe Optimal Voltage Indicator System (SOVI) – Alerts user if the lights are running outside of certified and optimal voltage ranges
Safe down to 0 volts
LinkEx Capable – HV units can be fitted with linkable sockets enabling multiple lights to be connected in series from a single power source
Ultra bright high power LED light output
Medium angle 33 degree flood beam
Wide voltage range 18-50V and 90-264V
Small, lightweight floodlamp construction
IP66/67 dust and watertight
Supplied with stainless steel stand and integral bridle
Very low maintenance
Magnet mounting and tripod options available
Lens protecting films available for blasting and painting applications

ATEX Certified Floodlite

Zones 1, 2, 21 & 22 Hazardous Areas

Zone 1 & Zone 2 Gas
Zone 21 & Zone 22 Dust
See below table for ATEX Certification details including T-Rating, Gas Groups and Zone locations

The Wolf WF-300XL range are floodlight manufactured by Wolf Safety Lamp to provide lighting in Zone 1, Zone 2, Zone 21 or Zone 22 hazardous areas – the LED floodlight are for use in potentially explosive atmospheres according to the ATEX Directive.

Wolf WF-300XL LinkEx LED Floodlite ATEX

WOLF LinkEx LED Floodlite ATEX Technical Information

The following table explains the technical specification differences for the Wolf WF-300XL floodlights – should you require support or advice on selecting the correct hazardous area floodlight please do not hesitate to contact us.

Wolf Part Reference		Wolf WF-300XL
Floodlite Description		LinkEx LED Floodlite
Voltage		18-50V AC/DC (LV)	90-264V AC/DV (HV)
Hazardous Area Code (ATEX & IECEx)		II 2 G D Ex eb mb op is IIC T4 Gb Ex tb op is IIIC T118°C Db T = -40°C to +55°C
Equipment Category		2GD
Type of Protection		‘eb’ Increased Safety, ‘mb’ encapsulation, ‘tb’ enclosure protection
Area of Hazardous Classification (Gas)		Zones 1 & 2, Gas Group IIA, IIB, IIC
Temperature Classification (Gas)		T4
Area of Hazardous Classification (Dust)		Zones 21 and 22, Dust Groups IIIA, IIIB and IIIC
Maximum Surface Temperature (Dust)		T118ºC
Ambient Temperature		-40ºC to +55ºC
ATEX Certificate		SIRA17ATEX3035X IECExSIR17.0013X
Enclosure		Marine Grade Aluminium Alloy, Epoxy Powder Coated
Lens		Toughened Glass
Beam Type		Medium Flood
Light Source	Type	36 x White High Power LED
	Power	55W	62W
	Output At LED Source	8,447 lumens	8,668 lumens
	Output Emitted From Floodlite	6,129 lumens	6,378 lumens
	Life	100,000+ Hours (Fitted for Life)
Ingress Protection		IP66/67
Weight		7.3kg (excluding cable)
Accessories		Supplied with bridle and lamp stand