Ex de Explosion Proof Fluorescent Lighting for Hazardous Areas | Technor RMS 560

---

Zone 1 & Zone 21 EXPLOSION PROTECTION Lighting

Fluorescent Lighting for Zone 1, Zone 21, Zone 2, Zone 22  | Hazardous Area Lighting Applications | Single & Twin Lamp

Technor RMS-560 is a fluorescent lighting fixture suitable for hazardous area lighting and offers offers Ex-e IIC mode of protection and has a body and glass frame are made of stainless steel AISI304 and manufactured from a single sheet of steel with no invasive mounting holes, to minimise the risk of water ingress through the housing.

Designed to allow the operator to work with free hands and alone during start-up or maintenance without needing to support any of the Ex de lighting fixture.

Technor EMS 560 Ex de fluorescent lighting fixtures are 95% recyclable only components and insulation of single core wires need some more care.

Technor RMS 560 fluorescent lighting is classified to international hazardous area classifications with ATEX and TRCU certification, with ingress protection IP65 and an operational ambient temperature range of -20°C to +60°C.

Thorne & Derrick, a trusted specialist distributor of hazardous area lighting, offers competitive pricing and in-stock availability for the complete range of Technor hazardous area lighting solutions, including electrical enclosures and explosion-proof junction boxes. Our extensive inventory ensures quick delivery for ATEX-certified lighting designed for Zone 1, Zone 21, Zone 2, and Zone 22 applications.

---

---

Technor RMS 560 Fluorescent Lighting – TECHNICAL FEATURES

Material	AISI304 stainless steel, 0,8mm thickness and transparent part in tempered glass (AISI 316 L version available upon request)
IP rating	IP65 (IP66 on request)
Ambient temperature range	-20°C to +60°C
Approvals	INERIS 01ATEX0060 (standard) TR CU (marking upon request, ordering code to be required)
Gaskets	Special cross-section tightness gasket, silicon rubber made (closed cell), located in housing channel between body and window frame.
Entries	Body complete of two 21mm Ø through holes (on one side) for cable entry, one complete of metallic plug with M20 locknut and gasket and the other one with temporary plastic plug to prevent dust ingress.
Hardware and screws	AISI304 Stainless steel external hardware and screws
Lamps	RMS series lighting fixtures are suitable for two pins fluorescent lamps G13 socket Philips TL-D or equivalent (lamps excluded)
Ballast	High frequency electronic ballast conforming with EN 60079 – 15 and IEC 60079 – 15
Rated Operation Voltage (UE)	220-240 V
Frequency	50 – 60 Hz
Power Factor	>0.95
Accessories available upon request	Pole mounting kit / Ceiling mounting kit / Suspension mounting kit / Wall mounting kit 3°- 4° through holes opposite side
Operating Principles	Available RMS.. lighting fixtures for emergency service of one tube: – 90 minutes ; guarantees 60’ duration with constant flux (emergency lumen factor 18%) and 30’ with decreasing flux

---

Technor RMS 560 Lighting – Normal Service

Technor Part Number	Code	Power (W)	Temperature Class	Ambient Temperature	Dimensions (mm)			Weight (kg)
					A	B	C
RMS-560-03	A020121180300	1X18	Gas T5 Dust T100ºC	(-20º;+55º)**	737	239	123	5.60
RMS-560-04	A020122180300	2X18	Gas T5 Dust T100ºC	(-20º;+55º)**	737	239	123	5.70
RMS-560-01	A020121360300	1X36	Gas T5 Dust T100ºC	(-20º;+55º)**	1347	239	123	8.90
RMS-560-02	A020122360300	2X36	Gas T5 Dust T100ºC	(-20º;+55º)**	1347	239	123	9.10
RMS-560-03/MS*	A020121180301	1X18	Gas T5 Dust T100ºC	(-20º;+55º)**	737	239	123	5.65
RMS-560-04/MS*	A020122180301	2X18	Gas T5 Dust T100ºC	(-20º;+55º)**	737	239	123	5.75
RMS-560-01/MS*	A020121360301	1X36	Gas T5 Dust T100ºC	(-20º;+55º)**	1347	239	123	8.95
RMS-560-02/MS*	A020122360301	2X36	Gas T5 Dust T100ºC	(-20º;+55º)**	1347	239	123	9.15

* With micro-switch
** In case of maximum ambient temperature reach +60°C, temperature class changes into T4/T135°C (ordering code to be required).
In case of maximum ambient temperature reach +40°C, temperature class changes into T6/T85°C (ordering code to be required).

---

Technor RMS 560 Lighting – Emergency Service

Technor Part Number	Code	Power (W)	Temperature Class	Ambient Temperature	Emergency Duration	Dimensions (mm)			Weight (kg)
						A	B	C
RMS-560-03 LE-P-90	A020121180310	1X18	Gas T5 Dust T100ºC	(-20º;+55º)*	90′	737	239	183	9.50
RMS-560-04 LE-P-90	A020122180310	2X18	Gas T5 Dust T100ºC	(-20º;+55º)*	90′	737	239	183	9.60
RMS-560-01 LE-P-90	A020121360310	1X36	Gas T5 Dust T100ºC	(-20º;+55º)*	90’**	1347	239	123	14.10
RMS-560-02 LE-P-90	A020122360310	2X36	Gas T5 Dust T100ºC	(-20º;+55º)*	90’**	1347	239	123	14.30

* In case of maximum ambient temperature reach +60°C, temperature class changes into T4/T135°C (ordering code to be required).
In case of maximum ambient temperature reach +40°C, temperature class changes into T6/T85°C (ordering code to be required).
** 120’ version available upon request (ordering code to be required).

---

---

Technor RMS-560 HAZARDOUS AREA CERTIFICATION & MARKING FOR Lighting

II 2 GD

• Ex de IIC T(**)
• Ex tD A21 IP65 T(**)
• ** T6/T85°C, T5/T100°C, T4/T135°C

under IEC Ex directive, junction boxes and enclosures are suitable for IIC group of gases/dusts only 

Data Sheets

• Ex de Lighting – Explosion Proof Hazardous Area Technor RMS 560 Fluorescent Lighting
  Download