ATEX Phones Zone 1 Hazardous Area – FHF ExResistTel Explosion Proof Telephone

ATEX Phones Zone 1 Hazardous Area

FHF ExResistTel telephones are ATEX phones designed for applications in the petrochemical industry as well as offshore installations, mills and ports.

Certified for areas susceptible to explosive dust and gases the FHF ExResistTel offers safe communications in Zone 1 hazardous area locations.

FHF ExResistTel is suitable for extreme operating conditions offering hazardous area communications in locations such as those with high temperatures, humidity, sea water, dust and extensive mechanical strain.

The FHF explosion proof telephone is equipped with a 21-key V4A stainless steel keypad that has been especially designed for use with gloves.

The ExResistTel ATEX phone is now certified to DNV GL Marine and offshore standards. Its alphanumeric display allows for a clear reading as well as offering all the same capabilities as standard in the office communication sector.

ATEX Phones Zone 1 Hazardous Area

Features

• Locking function with PIN
• ATEX telephone with hands-free operation
• Temperature range -25 °C to +60 °C
• Certified for dust and gas exposure in Zone 1 hazardous areas
• Display
• IP 66 according to EN 60529
• Different telephone housing colours

ExResistTel Explosion Proof Telephone

Technical Specification

Hazardous Area ATEX Certification – Zone 1
Hazardous area protection type	II 2 G Ex e mb [ib] IIC T5 Gb II 2 D Ex tb [ib] IIIC T100°C Db -25 °C < Ta < 60 °C II 2 G Ex e mb [ib] IIC T6 Gb II 2 D Ex tb [ib] IIIC T180°C Db -25 °C < Ta < 40 °C
Approval	DMT 02 ATEX E 183
Specifications
Line voltage	24 VDC to 66 VDC
Line current	15 mA to 100 mA
Ringing alternating current	24 VAC to 90 VAC (at 21…54 Hz ringing frequency) 30 VAC to 90 VAC (at 16.6…54 Hz ringing frequency)
Ring tone impedance	Greater than 6.0 KΩ at 25 Hz and 24…90 VAC. Greater than 4.0 KΩ at 50 Hz and 24…90 VAC
Inquiry key	Flash function may be set to 80 ms, 120 ms, 600 ms
Dialling procedure	PD-DTMF operation to be set in the menu. PD operation where the pulse/pause ratio can be set to 1.5:1 or 2:1 in the menu
W-conductor	Connection for external secondary sounder
Screw terminals	Up to 4sqmm rigid, Up to 2.5sqmm flexible
Environmental conditions
Degree of protection	IP 66 according to EN60529
Impact protection	IK 09 according to EN50102
Operating temperature	-25 °C to +60 °C for temperature class T5 -25 °C to +40 °C for temperature class T6
Storage temperature	-25 °C to +70 °C
Housing
Material	Glass fibre reinforced polyester
Height x width x depth	Approx. 266 mm x 227 mm x 135 mm
Weight	Approx. 5.5 kg
Display	Two-line alphanumeric diplay with pictograms Visual field approx. 78 mm x 26 mm
Keypad	Metal keypad with ice protection 21 keys with ABC lettering for name entries
Receiver
Stabilization bracket	Integrated, adjustable stabilization bracket
Handset cord	Stainless steel armoured cord
Earpiece	Dynamic capsule with stray field coil for inductive coupling of hearing aids
Mouthpiece	Elektret microphone
Noise suppression	Greater than 3 dB due to integrated horn mouth
Further characteristics
Optical call indication	Display screen
Ringing volume	Approx. 90 dB(A) in 1 m distance
Ring tones	10 sounds available
Listening by loudspeaker	Maximum volume approx. 68 dB(A) in 1 m distance
Handsfree operation	Maximum volume approx. 68 dB(A) in 1 m distance
Amplified listening	Receiver volume may be set from 0 dB(A) to +12 dB(A), in 7 steps
Menu guide	Multilingual
Telephone book	Max. 50 items (names and phone numbers)

FHF ExResistTel

Ordering Information

The full part number for the TWIN EExII is made up by appending the colour code to the part numbers given below*.

FHF ExResitTel Part Number	Designation	MEDC Model
MEDC FHF 112 861 01	Ex II telephone	Black
MEDC FHF 112 861 01 02	Ex II telephone	Red
MEDC FHF 112 861 02	Ex II telephone ZB	Without keypad and display, black
MEDC FHF 112 861 02 02	Ex II telephone ZB	Without keypad and display, red
MEDC FHF 112 862 01	Ex II telephone	Protection class I, black with blind plugs for metal cable gland M20 x 1.5, black
MEDC FHF112 862 02	Ex II telephone ZB	Protection class I, black without keypad and display with blind plugs for metal cable gland M20 x 1.5, black

➡ FHF ExResistTel has a number of ATEX telephone accessories and components especially certified for potentially explosive areas that can enhance the telephone’s functionality.

Ex Headset – MEDC FHF 112 861 03	Ex II additional earpiece – MEDC FHF 112 861 04	Ex II secondary sounder – MEDC FHF 112 643 06	TWIN EExII – MEDC FHF 118 833 ..*	Protection hood – available in a range of colours see spec for part numbers

*All ExResistTel models are ATEX/IECEx/DNV variants.
*INMETRO, UL and CUTR variants are available on request.
*Accessories are not available as DNV variants.

FHF

FHF is part of the Hazardous Area Communication (HAC) group belonging to Eaton who own MEDC. MEDC has been added to the EATON hazardous area communications business unit to which FHF have a complimentary range of hazardous area signalling and ATEX phones. T&D distribute the extensive range of FHF & Eaton MEDC ATEX Certified manual call points, visual, audible alarms, loudspeakers and telephones for hazardous area workplaces, including Zone 1 & Zone 2 explosive atmospheres.

Thorne & Derrick, are the Explosive Atmosphere Experts, distributing an extensive range of ATEX Certified Equipment including heat tracing cables and systems, electrical heating products, electrical enclosures and plug/sockets outlets.

Complete range of LV-HV Cable Joints, Terminations, Cleats & Glands are available to support installation of power, control and instrumentation cables up to 33kV – includes Cold Shrink for use in hazardous areas to provide electrical insulation and cable protection.

Thermon | EXHEAT | Abtech | Marechal Electric | 3M Electrical

 

Data Sheets

• Data Sheet FHF ExResistTel Explosion Proof Telephone
  Download