Heating Tape | Eltherm ELW-GN 10.0 | Trace Heat Tape For Sensitive & Glass Surfaces

Eltherm ELW-GN Heater Cable – Resistance Heating Process Temperature Maintenance

Eltherm ELW-GN resistance heating tapes and cables provide process temperature maintenance and frost protection to sensitive surfaces in non-corrosive environments such as laboratory apparatus, appliances and systems up to 260° Celsius.

Please Note: This product has been discontinued. Please Contact Thorne & Derrick for an alternative!

Heating tape – ELTHERM ELW-GN

SPECIFICATION

• Nominal Supply Voltage : 230V
• Maximum Output : 50 w/m
• Maximum Operating Temperature : 260ºC
• Minimum Installation Temperature : -60° Celsius
• Dimensions:: 25 x 6mm
• Minimum Heater Cable Bend Radius (Flat) : 10mm
• Insulation : PTFE
• Protective Braid: Nickel-plated Copper
• Outer Jacket: E-Glass Textile
• Cold Lead Length (Both Ends) : 1.2m without plug
• Moisture Proof : Yes
• Protection Class: I
• Manufactured According To : DIN VDE 0253
• Final Inspection According To: DIN VDE 0721 T 411, 2.5kV AC – 1 min
• Heating Cable Type : Resistance heating tape

Heating Tape | Eltherm ELW-GN

1. Insulation
2. Protective Braid
3. Outer Jacket

Trace Heating tape- Eltherm ELW-GN

SELECTION TABLE

Contact T&D for technical guidance, heat loss calculations for pipework systems and optimum specification of the correct trace heater tape or cable for your application.

Resistance heating tape application: frost protection and process heating.

Read our Blog about the benefits of heat trace tape and please contact us to discuss your requirements for frost protection or temperature maintenance heating of pipework and mechanical services.

Eltherm – Heating Cables, Heated Hoses, Surface Heating Mats & Drum Heaters

Data Sheets

• Eltherm ELW GN Heating Tape Trace Heating Cable For Sensitive & Glass Surfaces Specification
  Download