Hazloc XEU1-20 | Explosion Proof Electric Air Heater | Fan Diameter 20″
Hazloc XEU1 Explosion Proof Heater
Explosion Proof Electric Air Heater
Hazloc xeu1-20 | CSA Certified & Approved
Hazloc XEU1-20 explosion proof electric air heater is a CSA certified hazardous area heater specifically designed to meet the demanding requirements of the explosive atmosphere industries – see IECEx and ATEX explosion proof heaters for models certified according international and European classifications.
Hazloc ExCaliber Liquid-to-Air Heat-Exchanger Core
The harsh operating conditions of hazardous area locations require electric heating equipment that is safe, reliable, dependable.
The Hazloc XEU1 range of electric air heaters are designed to provide either primary or supplementary heating for comfort or for freeze protection in areas that are classified by CSA as hazardous locations (Gas and Dust atmospheres).
Hazloc Heaters XEU1 models have been designed to meet U.S. and Canadian (CSA) certification standards and the spark-resistant fan assembly is also compliant to AMCA 99-10, Type B.
There are three sizes of air heater in the XEU1 range, all of which feature ExCaliber high performance liquid-to-air heat-exchanger cores.
These are available in thirty five models, all with varying voltage and heat output combinations to meet the specific requirements of the end user.
CSA Certified | Explosion-Proof Electric Air Heater For Hazardous Locations
ExCaliber Liquid-to-Air Heat-Exchanger Cores
All XEU1 ExCaliber liquid-to-air heat-exchanger cores are evacuated, sealed and constructed using rugged carbon-steel tubes with copperfree, roll-formed aluminium fins in order to maximise heat transfer and carbon-steel headers for maximum durability, resistance to corrosion, and a longer life in demanding applications. The cores are protected by a pressure relief device, automatic reset high limit, and a back-up manual reset high limit.
The XEU1 heater has the highest air temperature rise, on average, in the industry across the complete kW range. ExCaliber heat-exchanger core is easy to remove when required.
HAZLOC xeu1-20
SPECIFICATION
| Air Heater Model | XEU1-20 | ||
| Fan Diameter |
20″ (508.0 mm) | ||
| Nominal kW | 25 | 30 | 35 |
| Air Delivery | 2100 cfm 3568 m³/hr |
3000 cfm 5097 m³/hr |
3000 cfm 5097 m³/hr |
| Approximate Air Velocity | 916 fpm 4.6 m/s |
1309 fpm 6.6 m/s |
1309 fpm 6.6 m/s |
| Approximate Horizontal Air Throw | 41 ft 12.5 m |
61 ft 18.6 m |
61 ft 18.6 m |
| Motor Power | ½ hp (373 watts) | ||
| Maximum Mounting Height (to underside of heater) | 12 ft 3.6 m |
15 ft 4.6 m |
15 ft 4.6 m |
General Specifications for XEU1 20″ Fan Explosion Proof Electric Air Heater
1. Hazardous Area Approvals
Certification: CCSAUS 235730 – Certified to Canadian and U.S. standards
North American Hazardous Location Classifications:
Class I, Division 1 & 2, Groups C & D
Class II, Division 1 & 2, Groups F & G
Temperature Code T3B (3kW/35kW =T3A)
2. Heater Materials
Cabinet: 14-gauge (0.075 in.) (1.9 mm) steel. Yellow epoxy/polyester powder coated with five-stage pre-treatment, including iron phosphate
Fan Guard: Split design with close wire spacing. A 3/8 in. (9.5 mm) diameter probe will not enter. Black polyester powder coated
Louvre Blades: Anodised extruded aluminium
3. Heat Exchanger
ExCaliber Core: Carbon steel headers and element housing with O-ring. Fin tubes are carbon steel tubes with copper-free, roll-formed aluminium fins @ 10 fins per in. Vacuum sealed. Coated with black, high-heat enamel
Heating Elements: Long-life, low watt-density, high grade metal-sheathed
Heat Transfer Fluid: Ethylene glycol and water including corrosion inhibitors
Header Material: Carbon Steel
4. Mounting
9/16” diameter holes – Four located on the top face of heater
5. Motor & Fan
Motor Type: Explosion-proof, thermally protected, 1725 RPM permanently lubricated ball bearing type with 56 frame and “easy-off” fan blade replacement feature
Fan: Three-blade spark-resistant aluminium, steel spider and hub with 5/8 in. bore
Fan Shroud: Spark-resistant aluminium. Compliant to AMCA 99-10, Type B
6. Controls
Control Circuit: Built-in 120VAC or 24VAC control (24VAC recommended)
Control Contactor: 40 FLA (50A resistive per pole) Definite Purpose. Rated for 500,000 mechanical operations.
Control Transformer: Multitap primary, 120VAC or 24VAC secondary
7. Operating Limits
Ambient Temperature: -40°F to 104°F (-40°C to 40°C). Storage: -58°F to 140°F (-50°C to 60°C)
Maximum Altitude: 10,000 ft (3048 m) above sea level
♦ See T Class Ratings | Hazardous Area Zones
Hazloc XEU1 Heater | Dimensions
Hazloc XEU1-20 Electric Air Heater
25-35kW
| Dimension | A | B | C | D | E | F | G |
| Inches (mm) |
7.5 (191) |
26.3 (668) |
24.3 (617) |
27.0 (686) |
27.5 (699) |
7.1 (180) |
23.3 (592) |
Hazloc heaters | HEATING APPLICATIONS
Hazloc Heaters are global suppliers and manufacturers of industrial and explosion-proof heaters and thermostats for hazardous areas and severe duty locations – this includes industrial heating products for non-hazardous and severe-duty applications. Explosion proof and hazardous area certifications include North American (NEC & CE), International (CENELEC & IEC), European (ATEX) and Russian EAEU (EAC EX).
Applications : Mud Tank Building, Boiler Packages, Service Rigs, Drilling Rigs, Paint Spray Booths, Offshore Cabins & Containers.
Hazloc XEU1 Explosion Proof Electric Air Heater – Data Sheet
Download
