ASCO 195/LISC 3/2 Solenoid Valves (Direct Acting) NC, Pad Mounting Valve – Hazardous Area Class II 1G Ex ia IIC Ga, II 2D Ex ib IIIC Db IP67
ASCO 195/LISC – Direct Acting/Operating Solenoid Valves For Hazardous Areas & Potentially Explosive Atmospheres
ASCO 195/LISC hazardous area solenoid valves are direct acting/operating type valves suitable for hazardous areas installation with international classifications including ATEX, UL, CSA and other local approvals on request.
3/2 Way Solenoid Valve
NC – Normally Closed Valve
NO – Normally Open Valve
Via ASCO Numatics FASTSHIP and SAMEDAY Express Delivery Service we are able to deliver 2,000+ ASCO valves from stock direct to you.
T&D are an Authorised UK Distributor for ASCO Numatics, part of Emerson Industrial Automation.
ASCO 195/LISC SOLENOID VALVES
- ASCO 195/LISC solenoid valves are low consumption valves for use in potentially explosive atmospheres according to ATEX-Directive 2014/34/EU EC type examination certificate no.: DEKRA 11 ATEX 0091 X IECEx Certificate of Conformity no.: IECEx DEK 11.0038X
- Compliance with the Essential Health and Safety Requirements has been assured by compliance with the International and European Standards IEC and EN: 60079-0 and 60079-11
- The valve’s Ex ia protection allows it to be installed in explosive atmospheres up to zone 1. It can be used in the chemical, oil and pharmaceutical industries, or in processing and packaging plants for flammable products (paints, solvents)
- Compact, monobloc pilot valve with spade plug connection according to ISO 4400 / EN 175301-803, form A (3 pins)
- ASCO 195/LISC solenoid valves can be mounted as operator onto valve 551-553 series SIL3 capable (EXIDA approval)
Differential Pressure : 2 – 10 bar [1 bar = 100 kPa]
Response Time : 11 ms
| Fluids | Temperature Range (TS) | Valve Seal Materials |
| air or inert gas dry, filtered (50 µm), without condensate, dew point: -20°C | -40°C to +65°C | FPM (fluoroelastomer) |
ASCO 195/LISC Solenoid Valves – valve FLUID CONTACT COMPATIBILITY
| ASCO 195/LISC Solenoid Valves | |
| Body | Aluminium |
| Internal Parts | Stainless steel |
| Seals | FPM |
| Subbase | PA or zamak |
ASCO 195/LISC Solenoid Valves – valve ELECTRICAL CHARACTERISTICS
Connector: Spade plug (cable Ø 6-8 mm)
Electrical Safety : IEC 335
Standard Valve Voltages : DC (=) : 12V .. 24V
ASCO 195/LISC – VALVE SPECIFICATIONS
| Pipe size | Orifice size | Flow | Operating pressure differential (bar) | Power coil (W) | ASCO Catalogue number | |||||
| 1- 2 | 2 – 3 | at 6 bar l/min (ANR) | coefficient Kv (l/min) | Min | Max | Without manual operator | ||||
| (mm) | (mm) | 1 – 2 | 2 – 3 | 1-2 | 2 – 3 | air (*) | ||||
| = | = | = | ||||||||
| NC – Normally closed | ||||||||||
| Pad mounting | 0.5 | 0.7 | 8 | 15 | 0.11 | 0.26 | 2 | 10 | 0.46 | ASCO 19500036 |
ASCO 195/LISC – VALVE OPTIONS
- ASCO 195/LISC solenoid valves can be mounted in any position without affecting operation
- Solenoid valve supplied with mounting screws
- Pipe connections G 1/8 have standard thread according to ISO 228/1
- Electrical connection between solenoid valve and barrier/interface with cable type A or B according to EN 50039
- Installation/maintenance instructions are included with each valve
ASCO SOLENOID VALVES – ATEX, IEC EX & NEMA hazardous area CERTIFIED
ASCO Solenoid Valves For Hazardous Area Oil, Gas & Petrochem Industries (ATEX & IECEx) – call T&D for sales, technical and specification support on all ASCO valves.
Image : Energy Reality - A Project of Post Carbon Institute.
Hazardous Area Certification
ATEX (Zone 1 Zone 2), IEC Ex, NEMA (Div 1 Div 2) & Explosion Protection
➡ Did you know? T&D supply ATEX hazardous area certified Analytic Gas Heated Hoses.
➡ Did you know? T&D distribute Hazardous Area Instrumentation Equipment as Approved Vendors to global oil and gas operators and their EPC’s.
ASCO 195/LISC 3/2 Solenoid Valves (Direct Acting) NC, Pad Mounting Valve – Hazardous Area Class II 1G Ex ia IIC Ga, II 2D Ex ib IIIC Db IP67
Download
