Zone 1 Hazardous Area LED Lighting – Appleton ATX Linmaster™ LELED
Please Note: Appleton™ ATX™ Linmaster™ LED Zone 1 Series replaces the FELED Series Luminaires
Zone 1 & Zone 21 Light Fitting
Hazardous Area LED Lighting – Appleton ATX Linmaster™
Appleton ATX™ Linmaster™ LELED is part of the Zone 1 Zone 2 (21/22) hazardous area LED luminaire ATEX lighting range that are specifically designed for simple installation and maintenance, offering a robust lighting solution for a variety of environments. Available in both standard and emergency battery backup configurations, the ATX™ Linmaster™ is ideally suited for use in Zone 1 and Zone 21 locations.
This versatile luminaire produces an impressive light output, ranging from 3,000 to 7,200 lumens, catering to a diverse array of applications. One of its key advantages is its compatibility with existing installations; it can be effortlessly retrofitted into the same mounting footprint as the ATX™ FE Series fluorescent luminaires, the ATX™ FELED Series LED luminaires, as well as nonmetallic fluorescent fixtures from a variety of other manufacturers.
➡ Read More: Fluorescent Lamp Ban | Plan For A Brighter Future
By utilising the same footprint and mounting accessories, the Linmaster™ LELED significantly reduces installation time, labour costs, and overall expenditure, making it a smart choice for any facility looking to upgrade its lighting system.
Typical Applications include:
- Oil refineries
- Petrochemical facilities
- Food processing plants
- Waste and water treatment plants
- Underground tunnels
- General manufacturing facilities
- Hydrogen and Biofuels plants
- LNG (Liquid Natural Gas) plants
Appleton ATX Linmaster™ Features
- Can be horizontally or vertically mounted. Optional positive switch disconnects power to LED’s and driver to allow maintenance in hazardous areas
- High impact resistance housing (20 Joules – IK10) from -40 °C to +60 °C or +65 °C(-40 °F to +140 °F or +149 °F) ambient temperature for standard models and wind profile for use in extreme offshore and onshore environments
- Contemporary, low profile, lightweight design is suitable for tight spaces. It features a hinged cover with central locking mechanism, and standard screw-type terminal block (accepts 1 to 6 mm² wire) for easy installation and maintenance. M20 plug or M25 plug
- Full range of lumen outputs, with light distribution equivalent to Appleton’s FE and other manufacturers Series fluorescent luminaires
- Easy to retrofit in same mounting footprint as Appleton’s FE Series and other manufacturers’ nonmetallic fluorescent luminaires
- Corrosion-resistant fiberglass reinforced polyester body and hinged polycarbonate lens. Central locking system and elastomer gasket seals against water and dust ingress, IP66
- Easily accessed for maintenance using Allen key or straight blade screw driver via the central opening which features a unique patented release system to prevent damage
- Universal, high efficiency, drivers cover voltage requirements for 100-277 Vac, 125-300 Vdc; 50/60 Hz +/- 10%. High power factor electronic driver (>0.95). Standard 6KV surge suppression for standard models. 24Vdc to 48Vdc optional driver available with IECEx certifications
- Industry-leading thermal management for safe, reliable operation over wide temperature range
- Available in 1.5 maintained and non-maintained emergency version and 3 hour maintained emergency version, including built-in monthly self- test. Test results through multi-colored LED. Replaceable battery with plug-in connector
- Field replaceable LED driver, cover and batteries
Zone 1 Hazardous Area LED Lighting
Zone 1 Hazardous Area LED Lighting
| ATEX/IECEx Certifications and Compliances | Zone 1 and 2 – 21 and 22; Ex II 2 GD; IP66; IK10 |
| Lumen Breakdown | 5000K CCT: 3K is 3200, 4K is 3710, 5K is 5400, 6K is 6100, 7K is 7000. 4000K CCT: 3K is 3170, 4K is 3640, 5K is 5300, 6K is 6010, 7K is 6810 3000K CCT: 3K is 3000, 4K is 3430, 5K is 5010, 6K is 5680, 7K is 6430 |
| Ambient Temperature | Standard versions: -40 °C up to +60 °C or +65 °C Emergency versions: -20 °C up to +60 °C |
| Standard Materials and Finishes | Fiberglass reinforced polyester (FRP) housing with polycarbonate cover |
| Battery Back-Up Option | 3 hour emergency version with 6 V – 7 Ah for 5K versions only |
| Warranty | 10 year standard warranty |
Replace Existing Fluorescent Fixtures
Linmaster™ hazardous area lights make it easy to replace existing fluorescent fixtures because they feature the same mounting dimensions and mounting accessories as original FE and FN fluorescent luminaires. The hazardous area lighting is available in light output from 3,000 to 7,200 lumens. In the rare event maintenance is needed, the cover can be quickly removed to access the internal components, while the specially designed hinged cover speeds up the process of replacing drivers, or other components.
Photometric Data
Standard or with Emergency Battery Backup
For complete specifications, technical details and hazardous area classification on Appleton Hazardous Area LED Luminaires please refer to the product sections below.
Zone 1 Hazardous Area LED Lighting – Appleton ATX Linmaster™ – Data Sheet
Download
