Heat Tape | Eltherm ELW-H | Trace Heating Tape For Glass, Quartz & Ceramic Materials up to 450°C
T&D – Eltherm Heating Cables Distributor
Eltherm ELW-H Heat Tape – Trace Heating
ELW-H is a heat tape and part of the range of resistance heating cables and tapes manufactured by Eltherm to provide process temperature maintenance and frost protection to vessels, pipes, valves and small components up to 450° Celsius. This flexible heat tape is used to heat up quartz, glass and ceramic devices or systems within dry, non-corrosive environments.
heat tape SPECIFICATION – Eltherm ELW-H
- Nominal Supply Voltage : 230V
- Maximum Output : 250 w/m
- Maximum Operating Temperature : 450ºC
- Minimum Installation Temperature : Not restricted
- Dimensions: 30 x 5mm
- Minimum Heater Cable Bend Radius (Flat): 10mm
- Insulation : E-Glass Textile
- Outer Jacket: E-Glass Textile
- Cold Lead Length (Both Ends) : 1.2m without plug
- Moisture Proof : No
- Protection Class: Depending on installation
- Manufactured According To : DIN VDE 0721 T2
- Final Inspection According To: DIN VDE 0721 T411, 1.5kV AC – 1 min
- Heating Cable Type : Resistance heating tape
Eltherm ELW-H Heat Tape – Resistance Heating Process Temperature Maintenance
Heat tape Selection Table – Eltherm ELW-H
Contact T&D for technical guidance, heat loss calculations for pipework systems and optimum specification of the correct trace heat tape or cable for your application.
Resistance heating tape applications: frost protection and process heating.
| Eltherm ELW-H Heat Tape Designation | Heated Length (m) | Nominal Output (W) |
| ELW-H-0.50 | 0.50 | 126 |
| ELW-H-0.70 | 0.70 | 180 |
| ELW-H-1.00 | 1.00 | 250 |
| ELW-H-1.50 | 1.50 | 375 |
| ELW-H-2.00 | 2.00 | 490 |
| ELW-H-2.50 | 2.50 | 622 |
| ELW-H-3.25 | 3.25 | 768 |
| ELW-H-4.00 | 4.00 | 987 |
| ELW-H-5.00 | 5.00 | 1260 |
| ELW-H-6.30 | 6.30 | 1555 |
| ELW-H-8.00 | 8.00 | 1945 |
Other lengths of ELW-H resistance heat tapes are available upon request.
Resistance Tolerance: +/- 5%
Lengths tolerance ± 2%, max ± 0.25m
Eltherm ELW-H – heat tape Applications
- Heat tracing on apparatus, appliances and systems made of glass, quartz or ceramic material
- Glass devices and systems with high output needs
- Laboratory & research applications
Eltherm ELW-H heat tape provides temperature maintenance and frost protection to pipework and mechanical services in all industries – typical applications include industrial and hazardous area heating of process pipework, instrument lines and storage tanks to maintain viscosity or prevent frost damage as an integral work-task of plant Winterisation.
T&D provide value-added design services for process heating using trace heating cables and systems. Heating cables using constant wattage, self-regulating, mineral insulated and resistance heating technology provide frost protection and temperature maintenance to pipework, drums, tanks, IBC’s and valves.
RESISTANCE HEATING CABLES
Eltherm resistance heating cables are manufactured from a high-resistance heating conductor, PTFE insulated with protective braid and fluoropolymer outer jacket. Powered at specific voltage the resistance heat generated by the conductors provides electrical trace heating to pipes and vessels. Resistance heating cables will “burn-out” if overlapped unlike self-regulating trace heating cables.
High temperature resistance heating cables insulated with glass fibre provide electrical heating up to 800° Celsius.
Eltherm Heating Cables
Eltherm
Eltherm – Heating Cables, Heated Hoses, Surface Heating Mats & Drum Heaters
➡ Did you know? T&D Exports supports the global oil, gas and petrochem industries with an extensive range of Hazardous Area Electrical, Mechanical, Process & Instrumentation Equipment.
➡ Did you know? T&D also Distribute Eltherm Electrical Heated Hoses.
Download
Eltherm ELW-H Heating Tape Trace Heating Cable For Glass Quartz Ceramic Materials up to 450C-Specification
Download
