Fisher Baumann 24000C Universal Globe Valve – Sliding Stem Valves

Fisher Baumann 24000C Universal Globe Valve is part of the sliding stem valve range that is well suited for general utility applications that are non-corrosive where pressure, flow and temperature controls are required as well as body integrity.

The Baumann 24000C boasts good control characteristics, tight shutoff, rugged construction, high performance packing, and easy maintainability.

The 24000C universal globe valve is therefore able to offer reduced maintenance costs, reduced process variability, and increased process availability, resulting in lower long-term operating costs.

Fisher Baumann 24000C Universal Globe Valve

Product Features

Compact and light weight design reduces installed piping costs
ASME and EN end connections are available to meet your piping standards
High quality type 316 austenitic stainless steel trim materials
416 stainless steel trim available
Superior dual plug and stem guiding provides increased stability during plug travel
Multiple trim capacity reductions available to meet changing process requirements
Epoxy powder coated valve body and actuator with stainless steel fasteners for corrosion resistance
Multi-spring, field reversible actuator with reduced deadband, permits direct operation from remote signal devices
Entire actuator and yoke can be removed from the valve assembly while maintaining packing integrity
Fisher^® FIELDVUE™ Digital Valve Controller available for remote calibration and diagnostics in facilities using the PlantWeb™ architecture

FISHER BAUMANN 24000C UNIVERSAL GLOBE VALVE

PRODUCT Specification

Sizes	NPS 1/2, 3/4, 1, 1-1/2, 2
Connections	CL150RF or DIN PN10-40 metric flanges
Body Material	Carbon Steel
Valve Body Rating	ANSI CL150
Trim Material	316 SS or PTFE Seat
Trim Characteristic	Equal % or Linear
Seat Leakage	ANSI/FCI 70-2 Class IV or VI
Cv Ratings	0.2 to 50
Bonnet Type	Standard threaded
Packing Material	PTFE V-ring, PTFE ENVIRO-SEAL™, or Graphite
Temperature Range	-29ºC to 232ºC (-20ºF to 450ºF)

Fisher Baumann 24000C Universal Globe Valve – Valve Body

FISHER BAUMANN 24000C Universal globe VALVE

Materials of construction

Key No	Description		Material
1	Valve Body		Cast Carbon Steel (ASME SA216 Grade WCC and EN 10213 1.0619 Dual Certified
2	Seat Ring	Standard	ASTM A276 S31600 / S31603 Dual Certified
		Optional	l ASTM A582 S41600 Condition T
4	Plug (Metal Seat) Cv < 2.5	Standard	ASME SA479 S21800 Annealed
		Optional	ASTM A582 S41600 Condition T
	Plug (Metal Seat) Cv > 4.0	Standard	ASTM A276 S31600 / S31603 Dual Certified
		Optional	ASTM A582 S41600 Condition T
	Plug (Soft Seat)		ASTM A276 S31600 / S31603 with PTFE (Polytetrafluoroethylene) Insert
5	Stem		ASTM A276 S31600 Condition A
8	Bonnet		Cast Carbon Steel (ASME SA216 and EN 10213 1.0619 Dual Certified
8A	Bonnet Bushing		ASTM A276 S44004, HT 56-60 HRC or ASTM A311 Class B Stressproof 62-65 HRC
9	Drive Nut (Yoke)		S30400
10	Packing Follower		ASTM A276 S31600 / S31603 Dual Certified
12	O-Ring		FKM (Fluorocarbon)
14	Packing	Standard	Refer to figure 2, table 2 (see data sheet)
		Optional	Refer to figure 3, table 3 (see data sheet)
27	Locknuts		Stainless Steel (18-8 SST)
49	Body Gasket	Standard	Annealed Soft Copper
		Optional	Graphite Grade GHR with 316 SST Insert
58	Travel Indicator		ASME SA240 S30400

See how Fisher Control Valves provide safe, efficient and intuitive flow control.

Fisher Rotary Valves: Flow Control For Power, Oil, Gas & Refining Pipelines

➡ Did you know? Fisher Control Valves are approved, certified and classified to international standards including ASME, CSA, IEC, NACE, FDA & NFPA. Should you require assistance with valve specification for explosion-proof or intrinsically safe applications in the hazardous area industries, please contact T&D.