ATEX Light Fittings (Linear) | Zone 2 LED Hazardous Area Lighting
Zone 2 Hazardous Area
LED Light Fittings (Linear)
➡ View our complete range of Zone 2 ATEX & IECEx Light Fittings manufactured by Raytec and certified according to the ATEX Directive to provide safe and reliable hazardous area lighting in potentially explosive atmospheres in both onshore and offshore locations.
➡ See also Zone 1 Light Fittings
➡ Visit ATEX Lighting to the view the complete range of hazardous area lighting.
Raytec SPARTAN Light Fittings (Linear) is a globally certified (ATEX, IEC Ex & EAC) range of LED light fittings designed for all Zone 1 and Zone 2 hazardous area lighting environments – LED luminaires designed for all new Zone 1 and Zone 2 hazardous area installations or to retrofit existing fluorescent installations.
- Ultra Long Life LED Light Fittings
- High Lumen Light Output LED
- Certification: ATEX and IEC Ex rated for Zone 1 and 2 Gas and Dust, and UL/CSA inc. C1D2
Zone 2 Light Fittings ATEX Rating: ATEX and IEC Ex rated for Gas & Dust Explosive Atmospheres
Hazardous Area Rating: Zone 2 – Gas & Dust
Zone 2 Gas
- II 3 G D
- Ex nA mc op is IIC T4 Gc
- Ta= -40°C to +60°C
- (-20°C to +50 for emergency variants)
T4 T5 T6 Temperature Ratings are available.
Zone 22 Dust
- Ex tc op is IIIC T80°C Dc
- Ta= -40°C to +60°C
- (-20°C to +50°C for emergency variants)
North America Rating
- Class I, Division 2 Groups A, B, C, D, T5
- Class II, Division 1 & 2 Groups E, F, G
- Class III, Division 1 & 2
- NEMA 4x, IP66/IP67
- UL50E, UL8750, UL 1203
- C22.2 No
- Emergency Variants – Certification Pending
- ATEX and IEC Ex approved – Zone 2
- UL/CSA approved including C1D2 and ABS
- Ultra Long Life LED
- High Lumen Output LED
- Fully Retrofitable
- Easy Installation and Maintenance
- Emergency Variants
- Wide Operating Temp -40° to +60°
- Zone 1 Variants available
- 5 Year Warranty
- UK Designed and Manufactured
LED Light fittings Zone 2
Hazardous Area LED Lighting
Zone 2 hazardous area lighting products are manufactured in the UK by Raytec and are ATEX and IEC Ex approved and supplied with a 5 year warranty – a full family of ATEX lighting products includes SPARTAN Flood, Linear, Bulkhead, High Bay and Crane Floodlights for Zone 2.
LED light fittings provide high performance, high specification, hazardous area lighting delivering world class leading performance and reliability and compliance with international classifications including ATEX and IEC Ex.
Zone 2/22 ATEX and IEC Ex LED Linear luminaire
|SPARTAN Zone 2/22 Linear WL84|
|SPZ-WL84||SPARTAN Linear 84 LED, Zone 2/22, White-Light||(2x18W / 2ft retrofit)|
|SPZ-WL84-EMX25||SPARTAN Linear 84 LED, Zone 2/22, White-Light – Intelligent Emergency variant||(2x18W / 2ft retrofit)|
|SPARTAN Zone 2/22 Linear WL168|
|SPZ-WL168||SPARTAN Linear 168 LED, Zone 2/22, White-Light||(2x36W / 4ft retrofit)|
|SPZ-WL168-EMX25||SPARTAN Linear 168 LED, Zone 2/22, White-Light – Intelligent Emergency variant||(2x36W / 4ft retrofit)|
|Non-standard SPARTAN Zone 2/22 Linear|
|SPZ-WL84-LL||SPARTAN Linear 84 LED, Zone 2/22, White-Light – Loop-in Loop-out variant||(2x18W / 2ft retrofit)|
|SPZ-WL168-LL||SPARTAN Linear 168 LED, Zone 2/22, White-Light – Loop-in Loop-out variant||(2x36W / 4ft retrofit)|
|SPZ-WL84-1200||SPARTAN Linear 84 LED, Zone 2/22, White-Light||(2x36W / 4ft retrofit)|
|SPZ-WL84-1200-EMX25||SPARTAN Linear 84 LED, Zone 2/22, White-Light – Intelligent Emergency variant||(2x36W / 4ft retrofit)|
|SPZ-WL168-1500||SPARTAN Linear 168 LED, Zone 2/22, White-Light||(2x58W / 5ft retrofit)|
Spartan Flood, The LED Zone 2 Light fitting
Thorne & Derrick, the hazardous area lighting specialists, can provide a Zone 2 lighting scheme utilising LED light fittings tailored to specific application requirements – 2D or 3D lighting designs provide visual representation of the site. The lighting design service will provide recommendations on the product type and number of lights required including the average, maximum and minimum light levels that can be achieved in accordance with ATEX and IEC Ex compliance.
LED Lighting – Zone 2 SPARTAN light fittings use CoolExtrude thermal management technology, ensuring a much cooler LED operating temperature. This provides up to 60% better heat dissipation compared to traditional lighting solutions and allows the floodlight product to operate for 10+ years in the most challenging environments.
Retrofittable – SPARTAN Linear for Zone 2 hazardous area is a direct replacement for fluorescent fittings, meaning you can upgrade to LED light without complication.
Flexible Installation & Easy Maintenance – the modular design allows great flexibility: the entire PSU chassis can be removed and located remotely at ground level for areas with difficult access. Additionally the individual PSU modules can be easily accessed and replaced making servicing and inspection of all key components within the Zone 2 light fitting quicker and easier.
SPARTAN Linear light fittings are designed for Zone 2 hazardous area installations or to retrofit existing fluorescent installations which require high performance, reliable, White-Light illumination.
The Light Fittings have been designed by Raytec to light up large and open areas and is supplied with an integral dedicated bracket allowing the beam angle of light to be tilted and easily targeted into the required space.
Raytec’s field-proven, long-life LED technology SPARTAN light fittings are ATEX and IEC Ex approved for all Zone 2 hazardous area lighting applications – watch the video to learn how high lumen output is provided by the latest high performance LED technology delivering low running costs and low energy consumption.