Frost Protection Cables | Eltherm ELP/SI 10 BO 230 | Constant Wattage Trace Heating Cable

Frost Protection Cables | Eltherm ELP/SI Heater Cable – Constant Wattage Process Temperature Maintenance

Eltherm ELP/SI constant wattage trace heating cables and tapes provide process temperature maintenance and frost protection to pipework, instrument lines, tanks and drums up to 200° Celsius.

➡ Read our Blog about heating cables and please contact us to discuss your requirements for frost protection or temperature maintenance heating of pipework and mechanical services.

Frost Protection Cables

SPECIFICATION

Eltherm ELP/SI Heater Cable wattages per metre – 10, 20, 30 and 40 watts.

  • Nominal Supply Voltage : 230V AC/DC
  • Nominal Temperature : 200ºC
  • Nominal Output: 10 w/m
  • Minimum Installation Temperature : -60° Celsius
  • Minimum Heater Cable Bend Radius : 30mm
  • Frost Protection Cable Insulation: Silicone
  • Constant Wattage Heater Cable Outer Jacket: Silicone
  • Frost Protection Cable Protective Braid: Copper
  • Cable Dimensions: 5.25 x 9.75 mm
  • Bus Wire Cross Section: 2 x 1.5 mm
  • Contact Spacing: 1.0 m
  • Is this Frost Protection Cable Moisture Proof?: Yes
  • Eltherm Frost Protection Cable Order Code: 0320102
How Eltherm ELP-SI Heater Cables Function

Frost Protection Cables | How Eltherm ELP/SI Heater Cables Function

Maximum heating circuit length

Type Watts/Metre Length (m) at 50°C Length (m) at 150 °C
ELP/Si 10 BO 230 10 198 147

 

Heating Cables - Eltherm Mineral Insulated Self Regulating Series Resistance Constant Wattage

Eltherm Heating Cables | Frost Protection Cables

Eltherm

Eltherm – Heating Cables, Heated Hoses, Surface Heating Mats & Drum Heaters

Data Sheets