LED Streetlight For Zone 2 Gas & Zone 21 Dust Environments | Abtech STR1

Published 24 Sep 2019

LED Streetlight For Zone 2 | Abtech STR1

LED Streetlight For Zone 2 | Abtech STR1

Abtech STR1

Zone 2 LED Streetlight For Zone 2

The Abtech STR-1 is a LED street light that is ATEX Certified designed specifically for use in Zone 2 Gas and Zone 21 Dust environments. The Zone 2 LED streetlight is an LED luminaire with superb horizontal distribution.

Wall mounting the streetlight by using an outreach bracket allows the lighting to be installed and transformed from a roadway lantern into a

By installing the streetlight using our wall mounted outreach bracket, it is transformed from a roadway lantern into a adaptable all multi-use LED luminaire for perimeter lighting for applications such as process buildings, storage facilities or workshops. Lower energy consumption and reduced maintenance costs come as standards as with the STR1 LED streetlight.

Zone 2 LED Streetlight Hazardous Area ATEX – Abtech STR1

Zone 2 LED Streetlight Hazardous Area ATEX – Abtech STR1

4 LED optics have been developed offering efficiency and flexibility. Dependent upon the requirement to either maximise horizontal spacing or provide a forward throw of light onto the roadway or the Ex-rated process area, designers can choose the most appropriate lens combination.

This adaptability can allow lighting schemes to be enhanced for the best night time visibility. For hazardous areas, not only can this cut down on vehicle accidents but also overcome potential health and safety issues by increasing site safety.

Zone 2 LED Streetlight Hazardous Area ATEX

Zone 2 LED Streetlight Hazardous Area ATEX

HAZARDOUS AREA CERTIFICATION

Abtech STR1 LED streetlights are certified according to leading hazardous area classifications including:

  • Area Classification Zone 2 & 22, Gas and Dust
  • Type of Protection Ex nR (restricted breathing)
  • Apparatus Coding Ex nR IIC T* Gc, Ex tc IIIC T100ºC Dc
  • Certificate Number AB15ATEX4111X
Zone 2 Hazardous Area Lighting - Abtech

Zone 2 Hazardous Area Lighting – Abtech

ELECTRICAL & PROCESS INSTRUMENTATION EQUIPMENT

FOR EXPLOSIVE ATMOSPHERES

Thorne & Derrick, the Explosive Atmosphere Experts, are Specialists Suppliers of Electrical & Process Instrumentation Equipment certified to ATEX and harmonised international IECEx standards – other accredited hazardous area certification bodies include EAC and INMETRO.

We stock and distribute an extensive range of equipment including control panels, terminal boxes, electrical enclosures, control stations, plugs and sockets, beacons, sounders and hazardous area lighting covering all methods of explosion protection Ex d (Flameproof), Ex e (Increased Safety), Ex i (Intrinsic Safety) and Ex p (Pressurised).

Electrical enclosures and junction boxes are available in a selection of materials including GRP, carbon steel, aluminium and stainless steel suitable for IIA, IIB and IIC gas groups and also dust hazards. We have expertise to design and build custom Ex d control panels; including all stages from design to drawing to delivery.

With access to leading manufacturers of equipment for hazardous areas; we can advise on and source the most cost-effective solution no matter what the requirements.

Product Categories:  Enclosures & Junction Boxes | Control Stations | Motor Starters | Heat Trace Cables & Systems | Gas Detection & Detectors | Fire Detection & Detectors | Heat Detectors | Electrical Heating & Heaters 

➡ Process Instrumentation Products: Ashcroft Gauges | ASCO Valves | Katronic Meters | KROHNE Meters | VEGA Sensors | Rotronic Sensors | SIKA Gauges

ATEX Process Instrumentation

Trace Heating | System Design & Supply

Further Reading