Linear LED Lighting EVF2 FL/PL | Hazardous Area ATEX Lighting | TECHNOR
Linear LED Lighting EVF2 Hazardous Area ATEX
The TECHNOR (part of the Marechal Electrical Group) range of ATEX hazardous area polycarbonate Linear LED Lighting EVF2 FL & PL, is available in GRP or copper-free aluminium for use in potentially explosive atmospheres more specifically in Zone 1 & Zone 2 (gas) and Zone 21 & Zone 22 (dust). The explosion-proof Linear LED Lighting EVF2 fixtures are ideally designed to provide uniform illumination in and around installations. TECHNOR‘s linear Ex Hazardous Area Lighting fixtures are available with single strip LED, making for an ideal solution for applications where a continuous row of lighting is required to ensure a uniform illumination of production sites and machinery.
TECHNOR additionally offer the LED Linear Lighting EVF variants, providing a similar alternative to suit specific hazardous areas/explosive atmospheres.
- End-cups made in copper-free aluminium or GRP.
- Three layers-extrusion lamp housing: Polycarbonate layer; Top side reflecting layer which protects inner electrical and electronic apparatus from direct sun heating/radiation effect; Filter layer which protects inner polycarbonate layer against UV radiation and related yellowing effect.
- Circular shape grants the best possible “CX” factor, therefore it is less affected by wind dusts, pollution and dirty bunching.
- All lighting fixtures are supplied ready for LOOP IN-LOOP OUT facility with cable up to 4sqmm.
- Integral electronic – Equipped with thermal guard protection to prevent overtemperature.
Linear LED Lighting EVF2 FL/PL Technical Specifications
The following table provides a further insight on TECHNOR‘s Linear LED Lighting EVF2 FL/PL Hazardous Area ATEX variants:
| EVF2 FL & PL Technical Specifications | |
| Material | EVF2-FL = End-cups in GRP/Light housing in polycarbonate
EVF2-PL = End-cups in copper-free aluminium/Light housing in polycarbonate |
| IP/IK Rating | IP66
IK10 |
| Ambient Temperature Range | -20°C to + 55°C |
| Approvals | FIDI 20 ATEX 0026X IECEx FIDI 20.0004X |
| Zones | Gas Zone: 2 Dust Zone: 22 |
| Rated Voltage | 220-240 VAC (normal service) |
| Frequency | 50-60 Hz |
| Colour Rendering Index | ex 80 CRI |
| Colour Temperature | e 4.000K others upon request |
| Power Factor | cos φ ≥ 0,98 |
| Surge Protection | 6 kV |
| LED Lifetime (L70) Ta +25°C | > 60.000 h – according to IES LM-80-08 |
| Hardware and Screws | AISI316L stainless steel external hardware and screws |
| Coating | EVF2-FL = Unpainted for EVF in GRP version EVF2-PL = Painted by polyuretane painting: RAL5014 painting cycle C4 suitable for On-Shore The reference standard is UNI EN ISO 12944 – 1: 2018 Upon request other colours and painting cycles (only for EVF-P*TL* LED) |
| Entries | 2x entries M20 x 1,5. Upon request: M25 entries or PNCX connector for EVF-L*TL*LED (GRP version) |
| Through Wiring | Loop-in / Loop-out possibility |
| Plug | 1 x plastic dustproof plug for M20 entry protection 1 x M20 polyamide/Brass nickel chrome plug c/w gasket (mounted) |
| Accessories Upon Request | AISI316L mounting kit: pole mounting, ceiling mounting, suspension mounting; Cable gland kit in brass nichel chrome or AISI316L stainless steel. |
EVF2 FL/PL Hazardous Area Lighting Selection Guide
Linear LED Lighting EVF2-PL Copper-free Aluminium Product Range
Linear LED Lighting EVF2 PL Copper-free Aluminium ATEX
| Code | Type | Total Power [W] | Lumen [lm] | Lum. Eff [lm/W] | Dimensions [mm] | Weight [kg] | ||
| A | B | C | ||||||
| A021362630001 | EVF2-PL – 129 | 29 | 3.835 | 132 | 760 | 167 | 194 | 6.50 |
| A021365230001 | EVF2-PL – 155 | 55 | 7.650 | 140 | 1370 | 167 | 194 | 8.50 |
| A021369530001 | EVF2-PL – 195 | 95 | 14.300 | 150 | 1675 | 167 | 194 | 9.50 |
Linear LED Lighting EVF2-FL GRP Product Range
Linear LED Lighting EVF2 FL GRP ATEX
| EVF2 Code | Product Type | Total Power [W] | Lumen [lm] | Lum. Eff [lm/W] | Dimensions [mm] | Weight [kg] | ||
| A | B | C | ||||||
| A021462630001 | EVF2-FL – 129 | 29 | 3.835 | 132 | 745 | 153 | 166 | 6.50 |
| A021465230001 | EVF2-FL – 155 | 55 | 7.650 | 140 | 1342 | 153 | 166 | 8.50 |
| A021469530001 | EVF2-FL – 195 | 95 | 14.300 | 150 | 1642 | 153 | 166 | 9.50 |
EVF2 Additional Lighting Accessories
The following table includes TECHNOR’s range of additional lighting accessories to accompany the Linear LED Lighting EVF2 Hazardous Area ATEX products:
| Lighting Accessories Code | Product Type |
| A601102010009 | 1″1/2 Pole Mounting Kit P14 AISI316L |
| A601102010008 | 2″ Pole Mounting Kit P14 AISI316L |
| A601102010005 | Ceiling Mounting Kit G3 AISI316L |
| A601102010012 | Suspension Mounting Kit G4 AISI316 |
TECHNOR | Ex Lighting Specialist
TECHNOR, part of the MARECHAL group, are world specialists in Hazardous Area Lighting equipment, engineered solutions for industrial and Ex environments. TECHNOR offer a wide variety of Ex Lighting products alongside the Linear LED Lighting EVF2 range, including Linear Fluorescent Lighting, EV Wellglass Lighting, LED Spotlight, Floodlight Lighting, LED Lanterns, Lamps, Lanterns and more.
âž¡ Thorne & Derrick distribute from stock the most extensive range of ATEX Lights & Hazardous Area Lighting certified according to ATEX and IECEx for Zone 1 and Zone 2 lighting applications
TECHNOR Linear LED Lighting EVF2 Hazardous Areas ATEX Technical Data Sheet
Download
