Self Regulating Heater Cable | EasyHeat SR52J | Trace Heating Cables

EasyHeat SR Self Regulating Heater Cable
EasyHeat SR trace heating cables are used in frost protection and de-icing applications to prevent costly damage to residential and commercial guttering and roofs.
This could be caused by ice formation or accumulation of snow in roof valleys, gutters which are prone to ice-damming and dangerous icicles and also downspouts that freeze and clog. The self-regulating heater cable automatically varies its heat output as the surrounding temperature changes.
Self Regulating Heater Cable
EasyHeat SR – Features & Benefits
- Cable manufactured with a waterproof TPE outer jacket, allowing cables to be installed in either dry or wet environments
- Heating cables be wrapped over itself to minimise the risk of damaging temperature-sensitive roof coatings
- Available in power densities of 3, 5 and 8 watts per foot (0.30 m) at 10°C/50°F for both 120 Vac and 240 Vac applications
- 240 Vac heating cables can also be used in 208 Vac or 277 Vac applications
- SR trace heating cables are UL Listed to US and Canadian Safety Standards and CSA Certified
- Minimum installation temperature -40ºC
- Available in cut-to-order lengths, 250 ft (76.20 m) self dispensing reel boxes and 750 ft (228.6 m) master supply reels
- See further information about Heating & Heat Tracing Cables
EASYHEAT SR Trace Heating CABLE – SPECIFICATION
EasyHeat Cable Part Number | SR52J Heating Cable | ||
Voltage (VAC) | 208 Vac | 240 Vac | 277 Vac |
Nominal Power Output in Ice (w/ft) | 7.0 | 8.0 | 10.0 |
Nominal Power Output at 50ºF | 5.0 | ||
Maximum Single Cable Length | 116.1 ft | 35.4 m | ||
Minimum Installation Temperature | -40ºC | ||
Current Load (Amp/ft) at 0°F (-20°C) start-up | 0.066 | ||
Current Load (Amp/ft) at -20°F (-30°C) start-up | 0.073 |

EasyHeat Self Regulating Heater Cable | Typical Shingle Roof
easyheat heat cable selection table
EasyHeat Cable Part Number | Cable Description | Package Quantity | Package Weight lb (kg) | UPC |
SR52J | 5 Watts per foot (0.30 m), 120 Vac, cut-to-order | 1 | 0.057 (0.026) per foot | 01362701021 |
SR52J250 | 250 ft (76.20 m) self dispensing reel | 1 | 20 (9.1) | 01362706919 |
SR52J750 | 750 ft (228.60 m) self dispensing reel | 1 | 72 (32.7) | 01362706920 |
self-regulating core
The self-regulating core at the centre of the EasyHeat SR trace heating cable is conductive and adjusts according to the surrounding temperature. When it is cold, the heating cable’s core has many conductive paths that generate enough heat to keep water flowing from the roof to the ground. When the surrounding temperature rises, there are fewer conductive paths, therefore generating less heat.

Self Regulating Heater Cable | EasyHeat SR
➡ EasyHeat Heater Cables provide frost protection using heat tracing cables to water pipework, hot water temperature maintenance, roof and gutter heating and snow melting for driveways, loading and car park ramps.

Roof Gutter De-icing | Frost Protection Cables | Ramp Heating | Tank Heating | Hot Water Cables | Heating Cables