ATEX & IECEX Base Drum Heater (T4) – Isopad FIBDR-SRQ

ATEX Base Drum Heater (T2) - Isopad FIBDR-SRX

ATEX Base Drum Heater (T4) – Isopad FIBDR-SRQ

Thermocoax Isopad FIBDR-SRQ ATEX base drum heaters are designed to provide medium flow and process temperature to 200 litre steel drums in Zone 1 and Zone 2 hazardous areas.

The FIBDR-SRQ ATEX base drum heater is constructed from a solid aluminium plate which houses the electric heating elements providing an evenly distributed through the plate to the drum. The base drum heater is fitted with castors  to allow for easy transportation.

ATEX Base Drum Heaters For Zone 1 & Zone 2 Hazardous Area Applications

ATEX Base Drum Heaters For Zone 1 & Zone 2 Hazardous Area Applications

Thermocoax Isopad FIBDR-SRQ base drum heaters are ATEX and IECEx approved for use within Zone 1 and Zone 2 hazardous area applications and are equipped with a 0ºC to +499ºC mechanical thermostat as standard.

FIBDR-SRQ ATEX base drum heaters can be used alongside the FIDR range of drum heater enclosures to improve the heat up times and reach higher temperatures.

T&D also offer a full range of IBC & Drum heating jackets and heaters.

 

ATEX Base Drum Heater - Isopad FIBDR-SRX - Illustration

ATEX Base Drum Heater – Isopad FIBDR-SRQ – Illustration

ATEX & IECEX Base Drum Heater (T4) – Isopad FIBDR-SRQ – Technical Specification

Area Classification Hazardous Area
Hazardous Area Zone Gas – Zone 1 & 2
Dust – Zone 21 & 22
Temperature Class T4
Ingress Protection IP6X (IP65)
Electrical Protection Class Class I
Ambient Temperature Range -40ºC to +50ºC
Approvals System Approval by Baseefa
Number of Certificate Baseefa08ATEX0280X / IECEx BAS 08.0088X
Marking Ex II 2 GD Ex e iam IIC T2 … T6 Ex tD A21 IP6X T240ºC … T80ºC
Norms EN, IEC Standard
Length 1100mm including castors
Height 75mm including castors
Outer Diameter 546mm
Heater Type Self Regulating Heating Cable
Carrier Aluminium plate, anodised black
Material of Thermal Insulation Mineral Fibre
Thickness 50mm
Outer Protection Sheet Steel
Paint Structured Blue Paint
Connection Lead Length 2m
Lead Cross Section 2.5mm²
Maximum Operating Temperature 180ºC
Connection Lead Insulation Material Silicone
Thermostat (Type) RAYSTAT-EX-03
Sensor Type Pt100 2-wire
Controller Range 0ºC to +499ºC
Ingress Protection IP65
Maximum Ambient Temperature -50ºC to +55ºC
Housing Material Polyester glass-fibre reinforced
Frequency 50-60Hz
Maximum Operating Voltage 254 Vac (~1ph)
Nominal Operating Voltage Depending on design
Nominal Power Depending on design
Maximum Operating Temperature 65ºC to 120ºC (depends on heating cable type and temperature class)
Options Design with other housing materials (e.g stainless steel).

 

ATEX & IECEX Base Drum Heater (T4) – Isopad FIBDR-SRQ – Product Specification

Part Number For Standard Sizes (ltr) Height Outer Diameter (OD) (mm) Nominal Power (W) Nominal Voltage (Vac) Weight (kg)
FIBDR-SRQ 200 78 546 1170 230 20

 

Drum Heaters - Non Hazardous & Hazardous Area Certified

Drum Heaters – Non Hazardous & Hazardous Area Certified. Ask T&D About ATEX Certified IBC Container Heaters For Hazardous Areas.

Data Sheets