ATEX & IECEX Base Drum Heater (T2) – Isopad FIBDR-SRX
Thermocoax Isopad FIBDR-SRX ATEX base drum heaters are designed to provide medium flow and process temperature to 200 litre steel drums in Zone 1 and Zone 2 hazardous areas.
The FIBDR-SRX ATEX base drum heater is constructed from a solid aluminium plate which houses the electric heating elements providing an evenly distributed through the plate to the drum. The base drum heater is fitted with castors to allow for easy transportation.
Thermocoax Isopad FIBDR-SRX base drum heaters are ATEX and IECEx approved for use within Zone 1 and Zone 2 hazardous area applications and are equipped with a 0ºC to +499ºC mechanical thermostat as standard.
FIBDR-SRX ATEX base drum heaters can be used alongside the FIDR range of drum heater enclosures to improve the heat up times and reach higher temperatures.
T&D also offer a full range of IBC & Drum heating jackets and heaters.
ATEX & IECEX Base Drum Heater (T2) – Isopad FIBDR-SRX – Technical Specification
|Area Classification||Hazardous Area|
|Hazardous Area Zone||Gas – Zone 1 & 2
Dust – Zone 21 & 22
|Ingress Protection||IP6X (IP65)|
|Electrical Protection Class||Class I|
|Ambient Temperature Range||-40ºC to +50ºC|
|Approvals||System Approval by Baseefa|
|Number of Certificate||Baseefa08ATEX0280X / IECEx BAS 08.0088X|
|Marking||Ex II 2 GD Ex e iam IIC T2 … T6 Ex tD A21 IP6X T240ºC … T80ºC|
|Norms||EN, IEC Standard|
|Length||1100mm including castors|
|Height||75mm including castors|
|Heater Type||Self Regulating Heating Cable|
|Carrier||Aluminium plate, anodised black|
|Material of Thermal Insulation||Mineral Fibre|
|Outer Protection||Sheet Steel|
|Paint||Structured Blue Paint|
|Connection Lead Length||2m|
|Lead Cross Section||2.5mm²|
|Maximum Operating Temperature||180ºC|
|Connection Lead Insulation Material||Silicone|
|Sensor Type||Pt100 2-wire|
|Controller Range||0ºC to +499ºC|
|Maximum Ambient Temperature||-50ºC to +55ºC|
|Housing Material||Polyester glass-fibre reinforced|
|Maximum Operating Voltage||254 Vac (~1ph)|
|Nominal Operating Voltage||Depending on design|
|Nominal Power||Depending on design|
|Maximum Operating Temperature||65ºC to 120ºC (depends on heating cable type and temperature class)|
|Options||Design with other housing materials (e.g stainless steel).|
ATEX & IECEX Base Drum Heater (T2) – Isopad FIBDR-SRX – Product Specification
|Part Number||For Standard Sizes (ltr)||Height||Outer Diameter (OD) (mm)||Nominal Power (W)||Nominal Voltage (Vac)||Weight (kg)|