EXHEAT FXS Hazardous Area Compact Enclosure Heaters – ATEX Certified Zone 1 & Zone 2

EXHEAT Hazardous Area Air Warmers ATEX & IECEx

EXHEAT Hazardous Area Air Warmers ATEX & IECEx

ATEX Compact Enclosure Heater

Zone 1 & Zone 2 (IIA, IIB, IIC) Hazardous Areas

EXHEAT FXS hazardous area compact enclosure heaters provide intrinsically safe, hazardous area certified heating and air warming for Zone 1, Zone 2, Zone 21 and Zone 22 hazardous areas.

The FXS range of self-regulating enclosure heaters provide a bespoke solution tailored to suit your requirements operating safely without a thermostat thanks to the heaters inbuilt ability to reduce the output as the temperature increases.

FXS enclosure heaters can operate in ambient temperatures as high as 130°C (T4) or 180°C (T3) and down to -60°C.

The FXS concept can be applied to practically any enclosure or component heating requirement. Designs will utilise an anodised aluminium body fitted with a self-regulating PTC cartridge type heating element in order to provide effective heating of enclosures via convection and radiation

 

EXHEAT FXS Hazardous Area Compact Enclosure Heaters - ATEX Certified Zone 1 & Zone 2

EXHEAT FXS Hazardous Area Compact Enclosure Heaters

EXHEAT FXS Hazardous Area Compact Enclosure Heaters

ATEX Certification & Installation

Hazardous Area Compact Enclosure Heaters For Zone 1 Zone 2 Hazardous Areas

Hazardous Area Compact Enclosure Heaters For Zone 1 Zone 2 Hazardous Areas

Certification: ATEX / IECEx    II 2 G/D
Ex d IIC T3 to T4 Gb Zone 1 and 2
Ex tb IIIC T200 to T135°C Db Zone 21 and 22
CU TR approval upcoming

Prior to installing the EXHEAT FXS hazardous area compact enclosure heaters the installer or end user should ensure that the unit has free and unrestricted airflow.

FXS self-regulating heaters are not restricted to being vertically mounted, but instead can be mounted flat on the base of an enclosure, horizontal or diagonally on an enclosure wall or directly to whatever component needs the heat.

FXS block heaters are also available offering a superior alternative to trace heating when either the size of the part being heated or installation time needs to be considered.

Voltage100 to 140VAC or 200 to 265VAC
OutputUp to 1000W (subject to design, mounting and ambient conditions)
Ambient-60 to +130°C: T4 heaters -60 to +180°C: T3 heaters
T ClassT4 (135°C) or T3 (200°C)
MountingDirectly bolted
Cabling3m standard (up to 10m available on request)
IP RatingIP66 / IP68

EXHEAT FXE Hazardous Area Compact Enclosure Heaters – Features

  • Hard anodised aluminium housing suitable for onshore and offshore applications
  • Can be directly mounted to the component that requires heating

    EXHEAT

    EXHEAT Stockist – Worldwide Delivery, Competitive Quotations

  • Compact and efficient
  • Suitable for ambient temperatures as low as -60°C and up to +180°C
  • Available in T3 and T4 temperature classes

HAZARDOUS AREA ELECTRICAL, MECHANICAL, PROCESS & INSTRUMENTATION SPECIALISTS

Hazardous Area Zone 1 Zone 2 ATEX Certified - Brands

Thorne & Derrick International distribute Electrical, Mechanical, Process & Instrumentation Equipment to the global hazardous area industries and are approved vendors to most leading oil, gas and petrochemical companies and their EPC’s.

T&D supply ATEX & IECEx Certified equipment for the detection, metering, flow measurement and heat tracing of potentially explosive gases in hazardous areas Zone 1 and Zone 2.

Hazardous Area - Gas Detection, Metering, Lighting & Flow Measurement

 

➡ Did you know?  T&D have a dedicated Exports and Hazardous Area Sales Team, send an enquiry.

➡ Did you know? T&D are Thermon, The Heat Tracing Specialists, largest UK stockist.

➡ Did you know? T&D are Trained by Crowcon in the specification and sale of Gas Detectors.