Ex d Enclosures – Explosion Proof Hazardous Area Technor CPS/EMH Aluminium Enclosure
Ex d Enclosures – Explosion Proof Hazardous Area Technor CPS/EMH Aluminium Enclosure
Ex d Enclosures
Junction Boxes & Enclosures Exd Flameproof Explosion Protection
Technor CPS/EMH Aluminium Enclosure is an Ex d enclosure which offers Ex-d IIC mode of explosion protection – the flameproof enclosures are suitable for use in hazardous areas of industrial plants for indoor and outdoor applications.
Technor CPS/EMH enclosures are classified to international hazardous area classifications with ATEX, IECex and TRCU certification, with ingress protection IP66 and an operational ambient temperature range of -60°C to +60°C.
Ex d enclosures are used for the following typical applications: push button stations, instrument housing, lighting distribution panels, power distribution panels, motor protection and panels for trace heating systems.
Technor CPS/EMH Aluminium Enclosure – Technical Features
| Material | Aluminium with low content of copper |
| IP Rating | IP66 |
| Ambient Temperature Range | -50°C to +55°C (ATEX) -60ºC to +60ºC (IECEx) |
| Approvals |
INERIS 03ATEX0009
IECEx BKI 15.0002
TR CU
|
| Surface Treatment | Green colour polyurethane painting cycle RAL6003 (other colour available upon request) |
| Entries | Metric pitch 1.5, ANSI B1.20.1 NPT, UNI-6125 |
| Standard Certificate Label | Made by self adhesive UV and corrosion resistant polyester, approved by INERIS Laboratory. |
Technor CPS/EMH enclosures – Aluminium
The following table enables the correct specification and selection of Exd Flameproof Enclosures manufactured from aluminium from the Technor CPS/EMH range:
| Technor Part Number (RAL6003) | Type | Window Diameter | Weight (kg) |
| B070109010021 | EMH-90 M25x1.5 | 90 | 1.40kg |
| B070109011021 | EMH-90 3/4″ NPT | 90 | 1.40kg |
Explosion Proof Hazardous Area Technor CPS/EMH Aluminium Enclosure – Dimensions
HAZARDOUS AREA CERTIFICATION & MARKING FOR ENCLOSURES
II 2 GD
- Ex d IIC T(*) Gb
- Ex tb IIIC T(*) Db IP66
- Ex db IIC T6/T5/T4
- * T6/T85°C, T5/T100°C, T4/T135°C
under IEC Ex directive, junction boxes and enclosures are suitable for IIC group of gases/dusts only
Flameproof Ex d & Hazardous Area Electrical Equipment Distributors
Contact Thorne & Derrick for an extensive range of hazardous area products for Electrical & Process Instrumentation applications: this includes flow meters, level sensors, solenoid valves, heat tracing cables and electrical heaters.
Lighting | Control Stations | Plugs & Sockets | Junction Boxes | Hazardous Area ATEX Certified Electrical Equipment for Explosive Atmospheres | Zone 1 & Zone 2
Ex d Enclosures – Explosion Proof Hazardous Area Technor CPS/EMH Aluminium Enclosure
Download
